长春工业大学学报(自然科学版)
長春工業大學學報(自然科學版)
장춘공업대학학보(자연과학판)
JOURNAL OF JILIN INSTITUTE OF TECHNOLOGY
2009年
1期
1-4
,共4页
张力辉%金松哲%王蕾%孙世成
張力輝%金鬆哲%王蕾%孫世成
장력휘%금송철%왕뢰%손세성
Ti2SnC%脉冲放电等离子烧结%机械合金化
Ti2SnC%脈遲放電等離子燒結%機械閤金化
Ti2SnC%맥충방전등리자소결%궤계합금화
机械合金化制备Ti2SnC粉体,采用放电等离子烧结(SPS)技术制备致密的Ti2SnC块体.研究烧结温度对机械活化SPS烧结Ti2SnC导电陶瓷块体致密化影响.结果表明,机械合金化合成Ti2SnC粉体经烧结后,气孔率随温度的升高逐渐降低.在900~1 000 ℃之间进行SPS烧结可以获得纯度较高的块体.当温度在600~900 ℃范围内时,密度随烧结温度的提高而逐渐增大,当温度进一步提高时,则略呈下降趋势.
機械閤金化製備Ti2SnC粉體,採用放電等離子燒結(SPS)技術製備緻密的Ti2SnC塊體.研究燒結溫度對機械活化SPS燒結Ti2SnC導電陶瓷塊體緻密化影響.結果錶明,機械閤金化閤成Ti2SnC粉體經燒結後,氣孔率隨溫度的升高逐漸降低.在900~1 000 ℃之間進行SPS燒結可以穫得純度較高的塊體.噹溫度在600~900 ℃範圍內時,密度隨燒結溫度的提高而逐漸增大,噹溫度進一步提高時,則略呈下降趨勢.
궤계합금화제비Ti2SnC분체,채용방전등리자소결(SPS)기술제비치밀적Ti2SnC괴체.연구소결온도대궤계활화SPS소결Ti2SnC도전도자괴체치밀화영향.결과표명,궤계합금화합성Ti2SnC분체경소결후,기공솔수온도적승고축점강저.재900~1 000 ℃지간진행SPS소결가이획득순도교고적괴체.당온도재600~900 ℃범위내시,밀도수소결온도적제고이축점증대,당온도진일보제고시,칙략정하강추세.