武汉科技大学学报(自然科学版)
武漢科技大學學報(自然科學版)
무한과기대학학보(자연과학판)
JOURNAL OF WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY(NATURAL SCIENCE EDITION)
2010年
1期
1-5
,共5页
沈巧珍%阳方%彭琦%仇东丽%孟征兵
瀋巧珍%暘方%彭琦%仇東麗%孟徵兵
침교진%양방%팽기%구동려%맹정병
钢包%水模型%混匀时间%去夹杂
鋼包%水模型%混勻時間%去夾雜
강포%수모형%혼균시간%거협잡
以某钢厂230 t钢包为研究对象,通过实验水模型对现场生产过程的模拟,研究底吹透气元件的布置方式和吹氩流量对搅拌效果和夹杂物去除率的影响.结果表明,双透气元件吹氩优于单透气元件吹氩搅拌效果,0.6R-γ双透气元件布置方式最佳,混匀时间随吹气量和透气元件夹角的增大而减少;夹杂物的去除率取决于吹氩量和吹氩时间,在0.2~0.8 L/min吹气量下,处理时间为0~4 min时夹杂物去除效果最好,5~8 min时可去除大部分夹杂物,24 min左右可去除所有夹杂物.
以某鋼廠230 t鋼包為研究對象,通過實驗水模型對現場生產過程的模擬,研究底吹透氣元件的佈置方式和吹氬流量對攪拌效果和夾雜物去除率的影響.結果錶明,雙透氣元件吹氬優于單透氣元件吹氬攪拌效果,0.6R-γ雙透氣元件佈置方式最佳,混勻時間隨吹氣量和透氣元件夾角的增大而減少;夾雜物的去除率取決于吹氬量和吹氬時間,在0.2~0.8 L/min吹氣量下,處理時間為0~4 min時夾雜物去除效果最好,5~8 min時可去除大部分夾雜物,24 min左右可去除所有夾雜物.
이모강엄230 t강포위연구대상,통과실험수모형대현장생산과정적모의,연구저취투기원건적포치방식화취아류량대교반효과화협잡물거제솔적영향.결과표명,쌍투기원건취아우우단투기원건취아교반효과,0.6R-γ쌍투기원건포치방식최가,혼균시간수취기량화투기원건협각적증대이감소;협잡물적거제솔취결우취아량화취아시간,재0.2~0.8 L/min취기량하,처리시간위0~4 min시협잡물거제효과최호,5~8 min시가거제대부분협잡물,24 min좌우가거제소유협잡물.