山东大学学报(工学版)
山東大學學報(工學版)
산동대학학보(공학판)
JOURNAL OF SHANDONG UNIVERSITY(ENGINEERING SCIENCE)
2007年
1期
1-5
,共5页
曹宁%李木森%马泉生%郝广政%白允强
曹寧%李木森%馬泉生%郝廣政%白允彊
조저%리목삼%마천생%학엄정%백윤강
碳/碳复合材料%制备%生物相容性%骨组织
碳/碳複閤材料%製備%生物相容性%骨組織
탄/탄복합재료%제비%생물상용성%골조직
医用碳/碳复合材料的制备工艺主要由碳纤维三维立体织物浸渍糠醇树脂、碳化、化学气相渗透和石墨化等主要步骤构成.本文采用扫描电子显微镜、肖氏硬度计对碳/碳复合材料的表面微观形貌及显微硬度进行观察和测定.为进一步探讨该材料作为骨组织替换材料的可行性,开展了实验动物骨内种植实验,并通过X射线和组织病理切片观察对材料与骨组织相容性进行了研究.结果表明,采用本工艺制备的碳/碳复合材料组织结构均匀致密.该材料生物相容性良好,具有与正常人体皮质骨十分接近的表面硬度.
醫用碳/碳複閤材料的製備工藝主要由碳纖維三維立體織物浸漬糠醇樹脂、碳化、化學氣相滲透和石墨化等主要步驟構成.本文採用掃描電子顯微鏡、肖氏硬度計對碳/碳複閤材料的錶麵微觀形貌及顯微硬度進行觀察和測定.為進一步探討該材料作為骨組織替換材料的可行性,開展瞭實驗動物骨內種植實驗,併通過X射線和組織病理切片觀察對材料與骨組織相容性進行瞭研究.結果錶明,採用本工藝製備的碳/碳複閤材料組織結構均勻緻密.該材料生物相容性良好,具有與正常人體皮質骨十分接近的錶麵硬度.
의용탄/탄복합재료적제비공예주요유탄섬유삼유입체직물침지강순수지、탄화、화학기상삼투화석묵화등주요보취구성.본문채용소묘전자현미경、초씨경도계대탄/탄복합재료적표면미관형모급현미경도진행관찰화측정.위진일보탐토해재료작위골조직체환재료적가행성,개전료실험동물골내충식실험,병통과X사선화조직병리절편관찰대재료여골조직상용성진행료연구.결과표명,채용본공예제비적탄/탄복합재료조직결구균균치밀.해재료생물상용성량호,구유여정상인체피질골십분접근적표면경도.