电工电能新技术
電工電能新技術
전공전능신기술
ADVANCED TECHNOLOGY OF ELECTRICAL ENGINEERING AND ENERGY
2009年
2期
7-11
,共5页
于开坤%张冠军%郑楠%田杰%刘国清
于開坤%張冠軍%鄭楠%田傑%劉國清
우개곤%장관군%정남%전걸%류국청
真空%氧化铝陶瓷%沿面闪络%ICCD
真空%氧化鋁陶瓷%沿麵閃絡%ICCD
진공%양화려도자%연면섬락%ICCD
真空沿面闪络的发生与发展的过程是电气与电子领域众多学者长期以来所关注的问题,这一复杂的放电现象至今还不能完全从机理上给予说明.本文采用电气、光学联合检测的方法,利用增强型电荷耦合器件(ICCD)对真空冲击电压下氧化铝陶瓷沿面闪络现象的动态发展过程进行了研究,考察了在试样表面溅射金属薄膜电极对闪络发光现象的影响.从闪络的电压、电流和发光波形看出,闪络发生时的电流和发光峰值出现时间一致,并滞后于电压截断点.从ICCD图像可以发现,在试样表面发生完全闪络之前其表面已经出现预闪络发光通道,而沿面闪络发光的最强阶段出现在闪络发生之后的几十纳秒,此时电流出现最大值,能够发现在电极的边缘位置发光最为强烈;溅射电极之后试样的沿面闪络电压有所降低,闪络发生时的发光强度提高,在闪络发生时电极之间的材料内部可能出现体内的复合过程.
真空沿麵閃絡的髮生與髮展的過程是電氣與電子領域衆多學者長期以來所關註的問題,這一複雜的放電現象至今還不能完全從機理上給予說明.本文採用電氣、光學聯閤檢測的方法,利用增彊型電荷耦閤器件(ICCD)對真空遲擊電壓下氧化鋁陶瓷沿麵閃絡現象的動態髮展過程進行瞭研究,攷察瞭在試樣錶麵濺射金屬薄膜電極對閃絡髮光現象的影響.從閃絡的電壓、電流和髮光波形看齣,閃絡髮生時的電流和髮光峰值齣現時間一緻,併滯後于電壓截斷點.從ICCD圖像可以髮現,在試樣錶麵髮生完全閃絡之前其錶麵已經齣現預閃絡髮光通道,而沿麵閃絡髮光的最彊階段齣現在閃絡髮生之後的幾十納秒,此時電流齣現最大值,能夠髮現在電極的邊緣位置髮光最為彊烈;濺射電極之後試樣的沿麵閃絡電壓有所降低,閃絡髮生時的髮光彊度提高,在閃絡髮生時電極之間的材料內部可能齣現體內的複閤過程.
진공연면섬락적발생여발전적과정시전기여전자영역음다학자장기이래소관주적문제,저일복잡적방전현상지금환불능완전종궤리상급여설명.본문채용전기、광학연합검측적방법,이용증강형전하우합기건(ICCD)대진공충격전압하양화려도자연면섬락현상적동태발전과정진행료연구,고찰료재시양표면천사금속박막전겁대섬락발광현상적영향.종섬락적전압、전류화발광파형간출,섬락발생시적전류화발광봉치출현시간일치,병체후우전압절단점.종ICCD도상가이발현,재시양표면발생완전섬락지전기표면이경출현예섬락발광통도,이연면섬락발광적최강계단출현재섬락발생지후적궤십납초,차시전류출현최대치,능구발현재전겁적변연위치발광최위강렬;천사전겁지후시양적연면섬락전압유소강저,섬락발생시적발광강도제고,재섬락발생시전겁지간적재료내부가능출현체내적복합과정.