石油化工
石油化工
석유화공
PETROCHEMICAL TECHNOLOGY
2009年
12期
1336-1341
,共6页
张宝华%潜飞%叶俊丹%陈斌%张玲
張寶華%潛飛%葉俊丹%陳斌%張玲
장보화%잠비%협준단%진빈%장령
脂肪酶催化剂%固定化%丝瓜络%生物柴油%餐饮废油
脂肪酶催化劑%固定化%絲瓜絡%生物柴油%餐飲廢油
지방매최화제%고정화%사과락%생물시유%찬음폐유
lipase catalyst%immobilization%luffa%biodiesel%waste edible oil
以丝瓜络为载体,对Pseudomonas fluorescens脂肪酶进行固定化研究.最佳固定化条件为:在25 ℃、正己烷介质中固定化30 min,脂肪酶与载体的配比为500 U/g.将自制固定化脂肪酶用于催化餐饮废油合成生物柴油,在反应温度40 ℃、餐饮废油与甲醇的摩尔比1 ∶ 3(甲醇分3次加入)、水质量分数0.4%、无溶剂条件下,甲酯收率最高达88.7%.在相同反应条件下,自制固定化脂肪酶与固定化Novozym 435脂肪酶进行比较发现,自制固定化脂肪酶的综合应用性能优于固定化Novozym 435脂肪酶.自制固定化脂肪酶重复使用10次后甲酯收率仍达85.5%,适合于工业化应用.
以絲瓜絡為載體,對Pseudomonas fluorescens脂肪酶進行固定化研究.最佳固定化條件為:在25 ℃、正己烷介質中固定化30 min,脂肪酶與載體的配比為500 U/g.將自製固定化脂肪酶用于催化餐飲廢油閤成生物柴油,在反應溫度40 ℃、餐飲廢油與甲醇的摩爾比1 ∶ 3(甲醇分3次加入)、水質量分數0.4%、無溶劑條件下,甲酯收率最高達88.7%.在相同反應條件下,自製固定化脂肪酶與固定化Novozym 435脂肪酶進行比較髮現,自製固定化脂肪酶的綜閤應用性能優于固定化Novozym 435脂肪酶.自製固定化脂肪酶重複使用10次後甲酯收率仍達85.5%,適閤于工業化應用.
이사과락위재체,대Pseudomonas fluorescens지방매진행고정화연구.최가고정화조건위:재25 ℃、정기완개질중고정화30 min,지방매여재체적배비위500 U/g.장자제고정화지방매용우최화찬음폐유합성생물시유,재반응온도40 ℃、찬음폐유여갑순적마이비1 ∶ 3(갑순분3차가입)、수질량분수0.4%、무용제조건하,갑지수솔최고체88.7%.재상동반응조건하,자제고정화지방매여고정화Novozym 435지방매진행비교발현,자제고정화지방매적종합응용성능우우고정화Novozym 435지방매.자제고정화지방매중복사용10차후갑지수솔잉체85.5%,괄합우공업화응용.
Pseudomonas fluorescens lipase was immobilized onto luffa supporter in n-hexane medium at 25 ℃ for 30 min. The loading amount of the lipase was 500 U/g. The immobilized Pseudomonas fluorescens lipase as catalyst was used in preparation of biodiesel from waste edible oil and methanol without other solvent. Under reaction conditions: temperature 40 ℃, water mass fraction 0.4%, and mole ratio of methanol to oil 3 ∶ 1, that methanol was divided into 3 portions and added separately to maintain the mole ratio of methanol to oil at about 1 ∶ 1 during reaction, the yield of methyl ester was more than 88.7%, which was higher than that from immobilized Novozym 435 lipase at same reaction conditions. After the immobilized Pseudomonas fluorescens lipase catalyst was reused 10 times, the yield of methyl ester still remained at 85.5%. It was hopeful that the catalyst be used in industrial process.