含能材料
含能材料
함능재료
ENERGETIC MATERIALS
2010年
1期
51-54
,共4页
军事化学与烟火技术%火工动力源%单点三脉冲推冲器%感应点火%输出性能%总冲量
軍事化學與煙火技術%火工動力源%單點三脈遲推遲器%感應點火%輸齣性能%總遲量
군사화학여연화기술%화공동력원%단점삼맥충추충기%감응점화%수출성능%총충량
military chemistry and pyrotechnic technology%explosive actuated device%three-impulse-at-one-spot thruster%sympathetic ignition%output performance%total impulse
单点三脉冲推冲器是在逻辑点火电路作用下有序地引燃三个点火具,实现对弹体的三次弹道修正.从主装药量、膜片厚度和燃烧室体积三方面对点火具间发生感应点火的影响因素进行了分析,增加主装药量有利于提高输出性能,但主装药量过大容易引起感应点火,取175~200 mg为宜;增大膜片厚度可以有效防止感应点火,但膜片厚度过大会导致能量损失过大,取0.3 mm为宜;增大燃烧室体积可以有效防止感应点火,但燃烧室体积过大会增大推冲器整体尺寸,取3.7 mL为宜.
單點三脈遲推遲器是在邏輯點火電路作用下有序地引燃三箇點火具,實現對彈體的三次彈道脩正.從主裝藥量、膜片厚度和燃燒室體積三方麵對點火具間髮生感應點火的影響因素進行瞭分析,增加主裝藥量有利于提高輸齣性能,但主裝藥量過大容易引起感應點火,取175~200 mg為宜;增大膜片厚度可以有效防止感應點火,但膜片厚度過大會導緻能量損失過大,取0.3 mm為宜;增大燃燒室體積可以有效防止感應點火,但燃燒室體積過大會增大推遲器整體呎吋,取3.7 mL為宜.
단점삼맥충추충기시재라집점화전로작용하유서지인연삼개점화구,실현대탄체적삼차탄도수정.종주장약량、막편후도화연소실체적삼방면대점화구간발생감응점화적영향인소진행료분석,증가주장약량유리우제고수출성능,단주장약량과대용역인기감응점화,취175~200 mg위의;증대막편후도가이유효방지감응점화,단막편후도과대회도치능량손실과대,취0.3 mm위의;증대연소실체적가이유효방지감응점화,단연소실체적과대회증대추충기정체척촌,취3.7 mL위의.
Three-impulse-at-one-spot thruster is a device which initiates three igniters by logic igniting circuit,and achieves trajectory correction for various flight vehicles. The effects of different main charge amounts,thickness of sealing film and combustion chamber volume on sympathetic ignition of the igniters were analyzed. Results show that output performance improves by increasing main charge amount while sympathetic ignition taking place after excessive charge,so 175-200 mg charge amount is suggested. The sympathetic ignition is effectively prevented by increasing thickness of sealing film while excessive thickness brings too much energy loss,so 0.3 mm thickness of sealing film is suggested. The sympathetic ignition is effectively prevented by increasing combustion chamber volume while too large volume will result in excessive whole dimension,so 3.7 mL chamber volume is suggested.