中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2002年
2期
338-341
,共4页
罗兵辉%柏振海%施国昌%江国金
囉兵輝%柏振海%施國昌%江國金
라병휘%백진해%시국창%강국금
6066铝合金%破片机理%力学性能
6066鋁閤金%破片機理%力學性能
6066려합금%파편궤리%역학성능
以挤压及热处理(T6态)工艺制备6066铝合金圆管型模拟炸弹, 进行了力学性能测试、砂坑中爆破试验及扫描电镜断口形貌观察. 研究结果表明: 随着应变速率的提高, 6066铝合金强度升高 , 塑性下降, 断口从韧性向脆性转变. 爆破破片断口形貌由拉伸断裂、剪切断裂及其过渡区组成, 但以拉伸断裂为主. 6066铝合金作为弹体材料密度小、装药量大、爆轰力大, 故而破片率及破片初速大, 杀伤力大. 通过破片的断裂特征, 分析了与材料动态断裂行为相关的形貌特征, 研究了该弹体材料的膨胀断裂行为.
以擠壓及熱處理(T6態)工藝製備6066鋁閤金圓管型模擬炸彈, 進行瞭力學性能測試、砂坑中爆破試驗及掃描電鏡斷口形貌觀察. 研究結果錶明: 隨著應變速率的提高, 6066鋁閤金彊度升高 , 塑性下降, 斷口從韌性嚮脆性轉變. 爆破破片斷口形貌由拉伸斷裂、剪切斷裂及其過渡區組成, 但以拉伸斷裂為主. 6066鋁閤金作為彈體材料密度小、裝藥量大、爆轟力大, 故而破片率及破片初速大, 殺傷力大. 通過破片的斷裂特徵, 分析瞭與材料動態斷裂行為相關的形貌特徵, 研究瞭該彈體材料的膨脹斷裂行為.
이제압급열처리(T6태)공예제비6066려합금원관형모의작탄, 진행료역학성능측시、사갱중폭파시험급소묘전경단구형모관찰. 연구결과표명: 수착응변속솔적제고, 6066려합금강도승고 , 소성하강, 단구종인성향취성전변. 폭파파편단구형모유랍신단렬、전절단렬급기과도구조성, 단이랍신단렬위주. 6066려합금작위탄체재료밀도소、장약량대、폭굉력대, 고이파편솔급파편초속대, 살상력대. 통과파편적단렬특정, 분석료여재료동태단렬행위상관적형모특정, 연구료해탄체재료적팽창단렬행위.