材料与冶金学报
材料與冶金學報
재료여야금학보
JOURNAL OF MATERIALS AND METALLURGY
2011年
2期
154-157
,共4页
伊智%刘筱婷%张卫军%李国军%陈海耿
伊智%劉篠婷%張衛軍%李國軍%陳海耿
이지%류소정%장위군%리국군%진해경
假想面%三元模型%炉顶压下
假想麵%三元模型%爐頂壓下
가상면%삼원모형%로정압하
针对连续加热炉建立了假想面法模型.在计算辐射直接交换面积时,考虑了炉顶压下对炉内传热的影响.以某厂3#加热炉为研究对象,模拟了钢坯加热过程;并将计算结果与传统的三元模型计算结果相比较,分析传统三元模型误差产生的原因,最后将通过各假想面的热流加入到三元模型的炉气能量平衡方程中,以修正屏蔽段间辐射造成的误差.修正的三元模型与假想面法模型计算结果相差较小,满足精度的要求,因此可以应用到在线跟踪计算中.对于在线运行的三元模型,当燃料量和燃料配比变化较大时,应提前计算生产过程中典型的燃料供给和分配下的各假想面传递的能量,生成数据文件,以便于实时调用.
針對連續加熱爐建立瞭假想麵法模型.在計算輻射直接交換麵積時,攷慮瞭爐頂壓下對爐內傳熱的影響.以某廠3#加熱爐為研究對象,模擬瞭鋼坯加熱過程;併將計算結果與傳統的三元模型計算結果相比較,分析傳統三元模型誤差產生的原因,最後將通過各假想麵的熱流加入到三元模型的爐氣能量平衡方程中,以脩正屏蔽段間輻射造成的誤差.脩正的三元模型與假想麵法模型計算結果相差較小,滿足精度的要求,因此可以應用到在線跟蹤計算中.對于在線運行的三元模型,噹燃料量和燃料配比變化較大時,應提前計算生產過程中典型的燃料供給和分配下的各假想麵傳遞的能量,生成數據文件,以便于實時調用.
침대련속가열로건립료가상면법모형.재계산복사직접교환면적시,고필료로정압하대로내전열적영향.이모엄3#가열로위연구대상,모의료강배가열과정;병장계산결과여전통적삼원모형계산결과상비교,분석전통삼원모형오차산생적원인,최후장통과각가상면적열류가입도삼원모형적로기능량평형방정중,이수정병폐단간복사조성적오차.수정적삼원모형여가상면법모형계산결과상차교소,만족정도적요구,인차가이응용도재선근종계산중.대우재선운행적삼원모형,당연료량화연료배비변화교대시,응제전계산생산과정중전형적연료공급화분배하적각가상면전체적능량,생성수거문건,이편우실시조용.