特种铸造及有色合金
特種鑄造及有色閤金
특충주조급유색합금
SPECIAL CASTING & NONFERROUS ALLOYS
2008年
10期
804-806
,共3页
江成军%张振忠%赵芳霞%段志伟%王超
江成軍%張振忠%趙芳霞%段誌偉%王超
강성군%장진충%조방하%단지위%왕초
超细银粉%厚膜导体浆料%性能
超細銀粉%厚膜導體漿料%性能
초세은분%후막도체장료%성능
试验以直流电弧等离子体法自制的超细银粉为原料,通过改变浆料各成分配比,结合金相显微镜、EDS等分析手段,研究了各成分对最终烧成厚膜导体性能的影响.结果表明,浆料的粘度随固含量的增加而增大,试验推荐固含量为80%; 在试验范围内,导体方阻随着玻璃粉的含量呈现先减小后增大的趋势,推荐玻璃粉最佳含量为3%; 玻璃粉粒径与Ag粒径对导体浆料的性能均有影响,对于导电性能而言,不同粒径Ag粉与玻璃粉之间存在最佳组合.对可焊性而言,平均粒径为102.92、204.26 nm 的Ag粉具有良好的可焊性,玻璃粉粒径对可焊性也有一定影响.
試驗以直流電弧等離子體法自製的超細銀粉為原料,通過改變漿料各成分配比,結閤金相顯微鏡、EDS等分析手段,研究瞭各成分對最終燒成厚膜導體性能的影響.結果錶明,漿料的粘度隨固含量的增加而增大,試驗推薦固含量為80%; 在試驗範圍內,導體方阻隨著玻璃粉的含量呈現先減小後增大的趨勢,推薦玻璃粉最佳含量為3%; 玻璃粉粒徑與Ag粒徑對導體漿料的性能均有影響,對于導電性能而言,不同粒徑Ag粉與玻璃粉之間存在最佳組閤.對可銲性而言,平均粒徑為102.92、204.26 nm 的Ag粉具有良好的可銲性,玻璃粉粒徑對可銲性也有一定影響.
시험이직류전호등리자체법자제적초세은분위원료,통과개변장료각성분배비,결합금상현미경、EDS등분석수단,연구료각성분대최종소성후막도체성능적영향.결과표명,장료적점도수고함량적증가이증대,시험추천고함량위80%; 재시험범위내,도체방조수착파리분적함량정현선감소후증대적추세,추천파리분최가함량위3%; 파리분립경여Ag립경대도체장료적성능균유영향,대우도전성능이언,불동립경Ag분여파리분지간존재최가조합.대가한성이언,평균립경위102.92、204.26 nm 적Ag분구유량호적가한성,파리분립경대가한성야유일정영향.