材料科学与工艺
材料科學與工藝
재료과학여공예
MATERIAL SCIENCE AND TECHNOLOGY
2007年
4期
477-479,483
,共4页
王惜宝%朱冬妹%张睎%陈佳月
王惜寶%硃鼕妹%張睎%陳佳月
왕석보%주동매%장희%진가월
氧气%电弧喷涂%反应合成%纳米Al2O3
氧氣%電弧噴塗%反應閤成%納米Al2O3
양기%전호분도%반응합성%납미Al2O3
为了探寻一种高产率制备纳米氧化铝粉末材料的方法,借助常规铝丝材的空气电弧喷涂工艺,通过在压缩空气中加入不同比例的氧气,进行了氧化铝粉末电弧喷涂反应合成的实验研究.针对压缩空气中加入不同比例氧气喷涂后所获得的喷涂粉末样品进行的X射线衍射、粉末粒度分布等分析结果表明,富氧条件下的铝丝电弧喷涂不仅可以高效制备粒径约60~70 nm的Al2O3粉末,而且随着氧气比例的提高可以显著提高纳米A12O3粉的产率,并进一步细化粉末的粒度.
為瞭探尋一種高產率製備納米氧化鋁粉末材料的方法,藉助常規鋁絲材的空氣電弧噴塗工藝,通過在壓縮空氣中加入不同比例的氧氣,進行瞭氧化鋁粉末電弧噴塗反應閤成的實驗研究.針對壓縮空氣中加入不同比例氧氣噴塗後所穫得的噴塗粉末樣品進行的X射線衍射、粉末粒度分佈等分析結果錶明,富氧條件下的鋁絲電弧噴塗不僅可以高效製備粒徑約60~70 nm的Al2O3粉末,而且隨著氧氣比例的提高可以顯著提高納米A12O3粉的產率,併進一步細化粉末的粒度.
위료탐심일충고산솔제비납미양화려분말재료적방법,차조상규려사재적공기전호분도공예,통과재압축공기중가입불동비례적양기,진행료양화려분말전호분도반응합성적실험연구.침대압축공기중가입불동비례양기분도후소획득적분도분말양품진행적X사선연사、분말립도분포등분석결과표명,부양조건하적려사전호분도불부가이고효제비립경약60~70 nm적Al2O3분말,이차수착양기비례적제고가이현저제고납미A12O3분적산솔,병진일보세화분말적립도.