CAJ | 학술논문

概述了复合裙成型工艺方案、典型复合裙的裙体结构及连接形式.介绍了国内复合裙的研制情况。采用高模量混杂树脂基体配方、整体成型工艺方案、铺层优化分析等技术，研制出φ150mm、φ480mm及φ1 000mm复合裙。试验结果表明，复合材料连接裙性能满足设计指标，与铝裙相比，可减重30％左右。
개술료복합군성형공예방안、전형복합군적군체결구급련접형식.개소료국내복합군적연제정황。채용고모량혼잡수지기체배방、정체성형공예방안、포층우화분석등기술，연제출φ150mm、φ480mm급φ1 000mm복합군。시험결과표명，복합재료련접군성능만족설계지표，여려군상비，가감중30％좌우。
The forming technology of SRM composite skirts, typical composite skirts construction and joint methods are briefly introduced. φ150mm,φ480mm and φ1 000mm composite skirts were manufactured by using high module bybrid resin,integrally forming technique and optimized laying methods. The results show that the performance of the composite skirt meets the design requirement, A reduction of weigh about 30%can be realized in comparison with the aluminium skirt.