CAJ | 학술논문

应用新型环氧固化体系对通用型环氧树脂（E-12）进行固化,制得了超低温固化型低光环氧粉末涂料,对其进行了系统研究,并与其他固化体系进行了对比,研究表明利用该固化体系可以制得表面流平效果与涂层物理性能良好的粉末涂层,并实现130℃下快速固化以及对涂层光泽度的控制,而其他固化体系在同等条件下则不能得到类似的粉末涂层。
응용신형배양고화체계대통용형배양수지（E-12）진행고화,제득료초저온고화형저광배양분말도료,대기진행료계통연구,병여기타고화체계진행료대비,연구표명이용해고화체계가이제득표면류평효과여도층물이성능량호적분말도층,병실현130℃하쾌속고화이급대도층광택도적공제,이기타고화체계재동등조건하칙불능득도유사적분말도층。
General epoxy resin（E-12） was cured by using new type of epoxy curing system,super low temperature low gloss powder coating was prepared and its system was studied.When compared with other curing system,the results show that by using this curing system,the surface flow leveling effect and the physical properties of the coating are very good coating.Fast curing under 130℃ and control the gloss of the coating was realized.However other curing system in the same conditions would not get similar powder coating.