特殊钢
特殊鋼
특수강
SPECIAL STEEL
2010年
5期
64-66
,共3页
冷轧电磁纯铁板%矫顽力%变形量%热处理
冷軋電磁純鐵闆%矯頑力%變形量%熱處理
랭알전자순철판%교완력%변형량%열처리
试验用电磁纯铁0.5~2.5 mm冷轧板由3.5~4.5 mm热连轧电磁纯铁板(%:0.005C、0.50Al)经350 mm四辊可逆式精轧机冷轧而成.结果表明,电磁纯铁板获得较小矫顽力的最佳退火温度为850~900℃,退火升降温速度对矫顽力影响较小.当冷轧变形量由28.6%增加至88.9%时,900℃退火后纯铁板的矫顽力由29.8A/m增加到73.5 A/m,获得较小矫顽力的最佳冷轧变形量为≤45%.
試驗用電磁純鐵0.5~2.5 mm冷軋闆由3.5~4.5 mm熱連軋電磁純鐵闆(%:0.005C、0.50Al)經350 mm四輥可逆式精軋機冷軋而成.結果錶明,電磁純鐵闆穫得較小矯頑力的最佳退火溫度為850~900℃,退火升降溫速度對矯頑力影響較小.噹冷軋變形量由28.6%增加至88.9%時,900℃退火後純鐵闆的矯頑力由29.8A/m增加到73.5 A/m,穫得較小矯頑力的最佳冷軋變形量為≤45%.
시험용전자순철0.5~2.5 mm랭알판유3.5~4.5 mm열련알전자순철판(%:0.005C、0.50Al)경350 mm사곤가역식정알궤랭알이성.결과표명,전자순철판획득교소교완력적최가퇴화온도위850~900℃,퇴화승강온속도대교완력영향교소.당랭알변형량유28.6%증가지88.9%시,900℃퇴화후순철판적교완력유29.8A/m증가도73.5 A/m,획득교소교완력적최가랭알변형량위≤45%.