工程热物理学报
工程熱物理學報
공정열물이학보
JOURNAL OF ENGINEERING THERMOPHYSICS
2009年
10期
1710-1712
,共3页
王英杰%徐国强%吴宏伟%邓宏武%罗翔
王英傑%徐國彊%吳宏偉%鄧宏武%囉翔
왕영걸%서국강%오굉위%산굉무%라상
RP-3%结焦%进口雷诺数
RP-3%結焦%進口雷諾數
RP-3%결초%진구뢰낙수
RP-3:coking%inlet Re
实验研究了RP-3沿流向结焦分布规律以及进口质量流量对其产生的影响.实验将RP-3加压至5 Mpa,使用2.1 m长不锈钢管(1:8 mm I.D.、2.2 mm O.D.、1Cr18Ni9Ti)中将流经其中的RP-3从127℃等热流加温至427℃.在定质量流量前提下,改变进口质量流量0.39、0.78、1.17和1.56 g/(s·mm~2),研究了进口雷诺数对结焦规律的影响.实验结果表明:随着质量流量的增加,RP-3结焦峰值位置逐渐向后推移;管壁平均结焦速率受与进口雷诺数的0.89次方成正比关系;单位质量RP-3结焦生成量随进口雷诺数的增加先减少后增加.
實驗研究瞭RP-3沿流嚮結焦分佈規律以及進口質量流量對其產生的影響.實驗將RP-3加壓至5 Mpa,使用2.1 m長不鏽鋼管(1:8 mm I.D.、2.2 mm O.D.、1Cr18Ni9Ti)中將流經其中的RP-3從127℃等熱流加溫至427℃.在定質量流量前提下,改變進口質量流量0.39、0.78、1.17和1.56 g/(s·mm~2),研究瞭進口雷諾數對結焦規律的影響.實驗結果錶明:隨著質量流量的增加,RP-3結焦峰值位置逐漸嚮後推移;管壁平均結焦速率受與進口雷諾數的0.89次方成正比關繫;單位質量RP-3結焦生成量隨進口雷諾數的增加先減少後增加.
실험연구료RP-3연류향결초분포규률이급진구질량류량대기산생적영향.실험장RP-3가압지5 Mpa,사용2.1 m장불수강관(1:8 mm I.D.、2.2 mm O.D.、1Cr18Ni9Ti)중장류경기중적RP-3종127℃등열류가온지427℃.재정질량류량전제하,개변진구질량류량0.39、0.78、1.17화1.56 g/(s·mm~2),연구료진구뢰낙수대결초규률적영향.실험결과표명:수착질량류량적증가,RP-3결초봉치위치축점향후추이;관벽평균결초속솔수여진구뢰낙수적0.89차방성정비관계;단위질량RP-3결초생성량수진구뢰낙수적증가선감소후증가.
Experiments are performed to study surface coke deposition distribution and the influence of inlet mass velocity.The flowing RP-3 is stressed to 5 MPa,and heated up from 127℃ to 427℃ in a stainless steel tube(1.8 mm I.D.,2.2 mm O.D.,1Cr18Ni9Ti)with a constant heat flux.The influence of inlet Re is investigated with variation of inlet mass velocity of 0.39,0.78,1.17 and 1.56 g/(s·mm~2).The results show that the RP-3 coke peak location shifts downstream as inlet Re increased.the average surface coke deposition rate is directly proportional to the 0.89~(th) power of inlet Re.and coke deposition per mass declines first and then increases as inlet Re increases.