耐火材料
耐火材料
내화재료
REFRACTORIES
2010年
4期
276-279
,共4页
六钛酸钾%晶须%隔热材料%热导率
六鈦痠鉀%晶鬚%隔熱材料%熱導率
륙태산갑%정수%격열재료%열도솔
以自合成的六钛酸钾晶须为主要原料,通过混料、成型和热处理等工艺制备出六钛酸钾晶须隔热材料,探讨了结合剂种类(无结合剂、PVA、黏土)、结合黏土加入量(质量分数分别为5%、7%和10%)、造孔剂锯末加入量(质量分数分别为3%、5%和7%)和六钛酸钾晶须的长径比(分别为10~20和50~60)对隔热材料的热导率、致密度和常温耐压强度的影响.结果表明:1)黏土结合试样的热导率比无结合荆试样和PVA结合试样的小,而常温耐压强度比无结合剂试样和PVA结合试样的大.2)黏土加入量对试样热导率的影响与热面温度相关:热面温度≤500℃时,试样热导率随黏土加入量的增加而减小,热面温度≥800 ℃时则随黏土加入量的增加而增大;随着黏土加入量的增加,试样的致密度和常温耐压强度均逐渐减小.3)随着锯末加入量的增加,试样的热导率、致密度和常温耐压强度均逐渐减小.4)采用高长径比晶须的试样具有较低的热导率和体积密度,较高的真气孔率和常温耐压强度.
以自閤成的六鈦痠鉀晶鬚為主要原料,通過混料、成型和熱處理等工藝製備齣六鈦痠鉀晶鬚隔熱材料,探討瞭結閤劑種類(無結閤劑、PVA、黏土)、結閤黏土加入量(質量分數分彆為5%、7%和10%)、造孔劑鋸末加入量(質量分數分彆為3%、5%和7%)和六鈦痠鉀晶鬚的長徑比(分彆為10~20和50~60)對隔熱材料的熱導率、緻密度和常溫耐壓彊度的影響.結果錶明:1)黏土結閤試樣的熱導率比無結閤荊試樣和PVA結閤試樣的小,而常溫耐壓彊度比無結閤劑試樣和PVA結閤試樣的大.2)黏土加入量對試樣熱導率的影響與熱麵溫度相關:熱麵溫度≤500℃時,試樣熱導率隨黏土加入量的增加而減小,熱麵溫度≥800 ℃時則隨黏土加入量的增加而增大;隨著黏土加入量的增加,試樣的緻密度和常溫耐壓彊度均逐漸減小.3)隨著鋸末加入量的增加,試樣的熱導率、緻密度和常溫耐壓彊度均逐漸減小.4)採用高長徑比晶鬚的試樣具有較低的熱導率和體積密度,較高的真氣孔率和常溫耐壓彊度.
이자합성적륙태산갑정수위주요원료,통과혼료、성형화열처리등공예제비출륙태산갑정수격열재료,탐토료결합제충류(무결합제、PVA、점토)、결합점토가입량(질량분수분별위5%、7%화10%)、조공제거말가입량(질량분수분별위3%、5%화7%)화륙태산갑정수적장경비(분별위10~20화50~60)대격열재료적열도솔、치밀도화상온내압강도적영향.결과표명:1)점토결합시양적열도솔비무결합형시양화PVA결합시양적소,이상온내압강도비무결합제시양화PVA결합시양적대.2)점토가입량대시양열도솔적영향여열면온도상관:열면온도≤500℃시,시양열도솔수점토가입량적증가이감소,열면온도≥800 ℃시칙수점토가입량적증가이증대;수착점토가입량적증가,시양적치밀도화상온내압강도균축점감소.3)수착거말가입량적증가,시양적열도솔、치밀도화상온내압강도균축점감소.4)채용고장경비정수적시양구유교저적열도솔화체적밀도,교고적진기공솔화상온내압강도.