电子显微学报
電子顯微學報
전자현미학보
JOURNAL OF CHINESE ELECTRON MICROSCOPY SOCIETY
2011年
4期
360-364
,共5页
高莎莎%栾佰峰%周敏洪%刘庆
高莎莎%欒佰峰%週敏洪%劉慶
고사사%란백봉%주민홍%류경
锆合金%压缩变形%EBSD
鋯閤金%壓縮變形%EBSD
고합금%압축변형%EBSD
本文以热轧退火态锆合金板材为研究对象,选用两种压缩试验样品,其压缩方向分别平行于原板材的法向(ND样品)和原板材的横向(TD样品),利用Gleeble热模拟试验机和EBSD分析技术,对两种样品准静态压缩变形行为进行了研究.结果表明,热轧退火态锆合金板材的准静态力学性能具有明显的各向异性,TD样品的屈服强度和流变应力均低于ND样品.且TD样品在变形过程中产生了一定数量的{10 12}拉伸孪晶,使TD样品中的晶粒c轴均向TD方向发生了转动.通过对两个加载方向的柱面滑移的Schmid Factor(SF)进行计算发现,TD样品的柱面滑移的SF大于ND样品,说明当加载方向沿着TD方向时,柱面滑移更容易开启,使得TD样品的屈服强度低于ND样品.
本文以熱軋退火態鋯閤金闆材為研究對象,選用兩種壓縮試驗樣品,其壓縮方嚮分彆平行于原闆材的法嚮(ND樣品)和原闆材的橫嚮(TD樣品),利用Gleeble熱模擬試驗機和EBSD分析技術,對兩種樣品準靜態壓縮變形行為進行瞭研究.結果錶明,熱軋退火態鋯閤金闆材的準靜態力學性能具有明顯的各嚮異性,TD樣品的屈服彊度和流變應力均低于ND樣品.且TD樣品在變形過程中產生瞭一定數量的{10 12}拉伸孿晶,使TD樣品中的晶粒c軸均嚮TD方嚮髮生瞭轉動.通過對兩箇加載方嚮的柱麵滑移的Schmid Factor(SF)進行計算髮現,TD樣品的柱麵滑移的SF大于ND樣品,說明噹加載方嚮沿著TD方嚮時,柱麵滑移更容易開啟,使得TD樣品的屈服彊度低于ND樣品.
본문이열알퇴화태고합금판재위연구대상,선용량충압축시험양품,기압축방향분별평행우원판재적법향(ND양품)화원판재적횡향(TD양품),이용Gleeble열모의시험궤화EBSD분석기술,대량충양품준정태압축변형행위진행료연구.결과표명,열알퇴화태고합금판재적준정태역학성능구유명현적각향이성,TD양품적굴복강도화류변응력균저우ND양품.차TD양품재변형과정중산생료일정수량적{10 12}랍신련정,사TD양품중적정립c축균향TD방향발생료전동.통과대량개가재방향적주면활이적Schmid Factor(SF)진행계산발현,TD양품적주면활이적SF대우ND양품,설명당가재방향연착TD방향시,주면활이경용역개계,사득TD양품적굴복강도저우ND양품.