耐火材料
耐火材料
내화재료
REFRACTORIES
2009年
1期
16-18,22
,共4页
王锋刚%朱伯铨%李天清%贺中央
王鋒剛%硃伯銓%李天清%賀中央
왕봉강%주백전%리천청%하중앙
分散剂%氧化铝凝胶粉%浆料%流变特性
分散劑%氧化鋁凝膠粉%漿料%流變特性
분산제%양화려응효분%장료%류변특성
以板状刚玉细粉(≤0.043 mm)、电熔镁砂细粉(≤0.088 mm)、仅α-Al2O3微粉(d50=0.1m)和Al2O3凝胶粉(<100 nm)为原料,按m(板状刚玉细粉):m(电熔镁砂细粉):m(α-Al2O3微粉):m(Al2O3凝胶粉)=6:2:1:1的基本配比配制成含水量(质量分数)为16.7%的浆料,研究了分别添加不同量柠檬酸钠、三聚磷酸钠、六偏磷酸钠、三聚氰胺甲醛树脂磺酸盐(SM)、β-萘磺酸盐与甲醛缩合物(FDN3000)、分散氧化铝(ADS、ADW)、聚乙二醇基聚合物(FS10)、聚羧酸脂基聚合物(FS20)对浆料流变特性的影响.结果表明:(1)这些分散剂(除六偏磷酸钠外)及其加入量对Al2O3-MgO质浆料的流变特性有较大影响,并且均存在最适宜的加入量.(2)添加FS10、FS20、ADW、FDN3000时,在其最佳添加量附近,浆料的流变特性接近牛顿流体,在其他添加量下浆料的流变特性接近假塑性流体;添加ADS、SM、柠檬酸钠或三聚磷酸钠时,浆料的流变特性接近假塑性流体.(3)FS10对Al2O3-MgO质浆料的分散效果较好,六偏磷酸钠则不能分散Al2O3-MgO质浆料.
以闆狀剛玉細粉(≤0.043 mm)、電鎔鎂砂細粉(≤0.088 mm)、僅α-Al2O3微粉(d50=0.1m)和Al2O3凝膠粉(<100 nm)為原料,按m(闆狀剛玉細粉):m(電鎔鎂砂細粉):m(α-Al2O3微粉):m(Al2O3凝膠粉)=6:2:1:1的基本配比配製成含水量(質量分數)為16.7%的漿料,研究瞭分彆添加不同量檸檬痠鈉、三聚燐痠鈉、六偏燐痠鈉、三聚氰胺甲醛樹脂磺痠鹽(SM)、β-萘磺痠鹽與甲醛縮閤物(FDN3000)、分散氧化鋁(ADS、ADW)、聚乙二醇基聚閤物(FS10)、聚羧痠脂基聚閤物(FS20)對漿料流變特性的影響.結果錶明:(1)這些分散劑(除六偏燐痠鈉外)及其加入量對Al2O3-MgO質漿料的流變特性有較大影響,併且均存在最適宜的加入量.(2)添加FS10、FS20、ADW、FDN3000時,在其最佳添加量附近,漿料的流變特性接近牛頓流體,在其他添加量下漿料的流變特性接近假塑性流體;添加ADS、SM、檸檬痠鈉或三聚燐痠鈉時,漿料的流變特性接近假塑性流體.(3)FS10對Al2O3-MgO質漿料的分散效果較好,六偏燐痠鈉則不能分散Al2O3-MgO質漿料.
이판상강옥세분(≤0.043 mm)、전용미사세분(≤0.088 mm)、부α-Al2O3미분(d50=0.1m)화Al2O3응효분(<100 nm)위원료,안m(판상강옥세분):m(전용미사세분):m(α-Al2O3미분):m(Al2O3응효분)=6:2:1:1적기본배비배제성함수량(질량분수)위16.7%적장료,연구료분별첨가불동량저몽산납、삼취린산납、륙편린산납、삼취청알갑철수지광산염(SM)、β-내광산염여갑철축합물(FDN3000)、분산양화려(ADS、ADW)、취을이순기취합물(FS10)、취최산지기취합물(FS20)대장료류변특성적영향.결과표명:(1)저사분산제(제륙편린산납외)급기가입량대Al2O3-MgO질장료적류변특성유교대영향,병차균존재최괄의적가입량.(2)첨가FS10、FS20、ADW、FDN3000시,재기최가첨가량부근,장료적류변특성접근우돈류체,재기타첨가량하장료적류변특성접근가소성류체;첨가ADS、SM、저몽산납혹삼취린산납시,장료적류변특성접근가소성류체.(3)FS10대Al2O3-MgO질장료적분산효과교호,륙편린산납칙불능분산Al2O3-MgO질장료.