岩矿测试
巖礦測試
암광측시
ROCK AND MINERAL ANALYSIS
2011年
2期
222-225
,共4页
黎香荣%陈永欣%罗明贵%马丽方%韦新红
黎香榮%陳永訢%囉明貴%馬麗方%韋新紅
려향영%진영흔%라명귀%마려방%위신홍
主次量成分%钒渣%波长色散X射线荧光光谱法%混合熔剂
主次量成分%釩渣%波長色散X射線熒光光譜法%混閤鎔劑
주차량성분%범사%파장색산X사선형광광보법%혼합용제
采用偏硼酸锂和四硼酸锂混合熔剂熔融法制样,波长色散X射线荧光光谱法同时测定钒渣中的Al2O3、SiO2、CaO、TiO2、MnO、P、V2O5、MgO、Fe、S、Cr2O3等11个主、次量成分.研究了熔剂、预氧化条件、熔样温度、脱模剂等对制样的影响.采用理论α系数校正基体效应及谱线重叠干扰的影响.测定钒渣试样各组分的相对标准偏差(RSD,n=10)在0.1%~7.5%.用钒渣行业级有证标准物质及实际样品验证,测定结果与标准值及其他方法的测定值相符.与化学法相比,该方法具有快速、简便,精密度好,准确度高等优点.
採用偏硼痠鋰和四硼痠鋰混閤鎔劑鎔融法製樣,波長色散X射線熒光光譜法同時測定釩渣中的Al2O3、SiO2、CaO、TiO2、MnO、P、V2O5、MgO、Fe、S、Cr2O3等11箇主、次量成分.研究瞭鎔劑、預氧化條件、鎔樣溫度、脫模劑等對製樣的影響.採用理論α繫數校正基體效應及譜線重疊榦擾的影響.測定釩渣試樣各組分的相對標準偏差(RSD,n=10)在0.1%~7.5%.用釩渣行業級有證標準物質及實際樣品驗證,測定結果與標準值及其他方法的測定值相符.與化學法相比,該方法具有快速、簡便,精密度好,準確度高等優點.
채용편붕산리화사붕산리혼합용제용융법제양,파장색산X사선형광광보법동시측정범사중적Al2O3、SiO2、CaO、TiO2、MnO、P、V2O5、MgO、Fe、S、Cr2O3등11개주、차량성분.연구료용제、예양화조건、용양온도、탈모제등대제양적영향.채용이론α계수교정기체효응급보선중첩간우적영향.측정범사시양각조분적상대표준편차(RSD,n=10)재0.1%~7.5%.용범사행업급유증표준물질급실제양품험증,측정결과여표준치급기타방법적측정치상부.여화학법상비,해방법구유쾌속、간편,정밀도호,준학도고등우점.