口腔正畸学
口腔正畸學
구강정기학
CHINESE JOURNAL OF ORTHODONTICS
2007年
2期
81-83
,共3页
正畸托槽%槽沟宽度精度%表面光洁度
正畸託槽%槽溝寬度精度%錶麵光潔度
정기탁조%조구관도정도%표면광길도
目的 比较临床常用的国产金属直丝弓托槽和进口金属直丝弓托槽槽沟宽度及其精度、槽沟近远中截面光洁度和结扎翼光洁度.方法 采用施奈德坐标测量仪对4种国产金属直丝弓托槽和4种进口金属直丝弓托槽放大30倍后进行测量.结果 国产托槽和进口托槽槽沟的近、远中宽度均有良好的一致性,但国产托槽和进口托槽槽沟宽度普遍大于设计值;进口托槽槽沟近远中端截面的光洁度优于国产托槽,国产托槽结扎翼表面光洁度已达到进口托槽结扎翼表面光洁度水平.结论 绝大部分国产和进口直丝弓金属托槽槽沟宽度较设计值大,个别品牌托槽槽沟宽度显著大于设计值.国产和进口金属托槽结扎翼表面均有较好的抛光度,但国产托槽槽沟内的抛光工艺尚待提高.
目的 比較臨床常用的國產金屬直絲弓託槽和進口金屬直絲弓託槽槽溝寬度及其精度、槽溝近遠中截麵光潔度和結扎翼光潔度.方法 採用施奈德坐標測量儀對4種國產金屬直絲弓託槽和4種進口金屬直絲弓託槽放大30倍後進行測量.結果 國產託槽和進口託槽槽溝的近、遠中寬度均有良好的一緻性,但國產託槽和進口託槽槽溝寬度普遍大于設計值;進口託槽槽溝近遠中耑截麵的光潔度優于國產託槽,國產託槽結扎翼錶麵光潔度已達到進口託槽結扎翼錶麵光潔度水平.結論 絕大部分國產和進口直絲弓金屬託槽槽溝寬度較設計值大,箇彆品牌託槽槽溝寬度顯著大于設計值.國產和進口金屬託槽結扎翼錶麵均有較好的拋光度,但國產託槽槽溝內的拋光工藝尚待提高.
목적 비교림상상용적국산금속직사궁탁조화진구금속직사궁탁조조구관도급기정도、조구근원중절면광길도화결찰익광길도.방법 채용시내덕좌표측량의대4충국산금속직사궁탁조화4충진구금속직사궁탁조방대30배후진행측량.결과 국산탁조화진구탁조조구적근、원중관도균유량호적일치성,단국산탁조화진구탁조조구관도보편대우설계치;진구탁조조구근원중단절면적광길도우우국산탁조,국산탁조결찰익표면광길도이체도진구탁조결찰익표면광길도수평.결론 절대부분국산화진구직사궁금속탁조조구관도교설계치대,개별품패탁조조구관도현저대우설계치.국산화진구금속탁조결찰익표면균유교호적포광도,단국산탁조조구내적포광공예상대제고.