浙江大学学报(工学版)
浙江大學學報(工學版)
절강대학학보(공학판)
JOURNAL OF ZHEJIANG UNIVERSITY(ENGINEERING SCIENCE)
2007年
4期
581-584
,共4页
俞学中%郭乙木%李俊%张蕴秋%何荣新
俞學中%郭乙木%李俊%張蘊鞦%何榮新
유학중%곽을목%리준%장온추%하영신
股骨髋关节%应力分析%假体柄%尺寸设计
股骨髖關節%應力分析%假體柄%呎吋設計
고골관관절%응력분석%가체병%척촌설계
在人工髋关节假体柄承受压力作用下,假设股骨和假体柄为完全结合的同心圆柱体,建立了一个相对完善的界面应力传递理论模型,获得了界面剪切应力和径向应力随轴向位置变化的分布.界面最大的剪应力发生在z=0处,即股骨颈的截面上.随着z的增大,界面剪应力呈幂指数减小.重要的是使得股骨假体柄与股骨之间界面应力在假体柄轴向上沿长度保持为一定常数且与施加于假体柄z=0处的压力相平衡,这样就不会出现股骨局部应力集中和假体柄下沉的现象.假设0<z<0.1 m区域内的剪应力值等于z=0.1 m处的值,计算出假体柄半径a随轴向位置变化的分布,进而为假体柄表面尺寸的设计提供一个理论参考依据.
在人工髖關節假體柄承受壓力作用下,假設股骨和假體柄為完全結閤的同心圓柱體,建立瞭一箇相對完善的界麵應力傳遞理論模型,穫得瞭界麵剪切應力和徑嚮應力隨軸嚮位置變化的分佈.界麵最大的剪應力髮生在z=0處,即股骨頸的截麵上.隨著z的增大,界麵剪應力呈冪指數減小.重要的是使得股骨假體柄與股骨之間界麵應力在假體柄軸嚮上沿長度保持為一定常數且與施加于假體柄z=0處的壓力相平衡,這樣就不會齣現股骨跼部應力集中和假體柄下沉的現象.假設0<z<0.1 m區域內的剪應力值等于z=0.1 m處的值,計算齣假體柄半徑a隨軸嚮位置變化的分佈,進而為假體柄錶麵呎吋的設計提供一箇理論參攷依據.
재인공관관절가체병승수압력작용하,가설고골화가체병위완전결합적동심원주체,건립료일개상대완선적계면응력전체이론모형,획득료계면전절응력화경향응력수축향위치변화적분포.계면최대적전응력발생재z=0처,즉고골경적절면상.수착z적증대,계면전응력정멱지수감소.중요적시사득고골가체병여고골지간계면응력재가체병축향상연장도보지위일정상수차여시가우가체병z=0처적압력상평형,저양취불회출현고골국부응력집중화가체병하침적현상.가설0<z<0.1 m구역내적전응력치등우z=0.1 m처적치,계산출가체병반경a수축향위치변화적분포,진이위가체병표면척촌적설계제공일개이론삼고의거.