耐火与石灰
耐火與石灰
내화여석회
REFRACTORIES & LIME
2011年
3期
1-4
,共4页
吴晓%赵惠忠%白城%宋世峰%贺中央
吳曉%趙惠忠%白城%宋世峰%賀中央
오효%조혜충%백성%송세봉%하중앙
纳米碳酸钙%刚玉浇注料%力学性能%显微结构
納米碳痠鈣%剛玉澆註料%力學性能%顯微結構
납미탄산개%강옥요주료%역학성능%현미결구
以板状刚玉、氧化铝微粉、商品纳米碳酸钙、Alphabond300为主要原料,FS10为减水剂,制备了不同纳米碳酸钙含量的刚玉浇注料试样,并测定了其经1000℃及1600℃热处理后的显气孔率、体积密度和耐压强度.利用扫描电子显微镜观察了材料的微观结构.结果表明,在减水剂加入量一定时,随纳米碳酸钙加入量的增加,需水量逐渐增加,显气孔率逐渐升高,耐压强度也逐渐提高.在控制浇注料流动值基本一致的情况下,随纳米碳酸钙加入量的增加,显气孔率明显增大,耐压强度逐渐提高.
以闆狀剛玉、氧化鋁微粉、商品納米碳痠鈣、Alphabond300為主要原料,FS10為減水劑,製備瞭不同納米碳痠鈣含量的剛玉澆註料試樣,併測定瞭其經1000℃及1600℃熱處理後的顯氣孔率、體積密度和耐壓彊度.利用掃描電子顯微鏡觀察瞭材料的微觀結構.結果錶明,在減水劑加入量一定時,隨納米碳痠鈣加入量的增加,需水量逐漸增加,顯氣孔率逐漸升高,耐壓彊度也逐漸提高.在控製澆註料流動值基本一緻的情況下,隨納米碳痠鈣加入量的增加,顯氣孔率明顯增大,耐壓彊度逐漸提高.
이판상강옥、양화려미분、상품납미탄산개、Alphabond300위주요원료,FS10위감수제,제비료불동납미탄산개함량적강옥요주료시양,병측정료기경1000℃급1600℃열처리후적현기공솔、체적밀도화내압강도.이용소묘전자현미경관찰료재료적미관결구.결과표명,재감수제가입량일정시,수납미탄산개가입량적증가,수수량축점증가,현기공솔축점승고,내압강도야축점제고.재공제요주료류동치기본일치적정황하,수납미탄산개가입량적증가,현기공솔명현증대,내압강도축점제고.