施工技术
施工技術
시공기술
CONSTRUCTION TECHNOLOGY
2010年
8期
141-143
,共3页
张宇鹏%徐中文%王军%商文升
張宇鵬%徐中文%王軍%商文升
장우붕%서중문%왕군%상문승
钢结构井字梁%钢桁架%整体提升%计算分析
鋼結構井字樑%鋼桁架%整體提升%計算分析
강결구정자량%강항가%정체제승%계산분석
中国联通科研中心办公楼主楼有4处连体钢结构,分为两种:平面钢结构井字梁和空间钢桁架,具有下方完全悬空、结构体型巨大、单个杆件重量大等特点.根据现场实际情况,选用液压同步整体提升施工技术,制定了"地面散件拼装成整体,一次吊装就位,部分散件空中拼装"的施工方案.重点介绍了两种钢结构的提升系统,通过有限元计算,指出支座反力,各提升点最大允许位移差,提升过程钢结构强度、刚度及稳定性等均满足要求.
中國聯通科研中心辦公樓主樓有4處連體鋼結構,分為兩種:平麵鋼結構井字樑和空間鋼桁架,具有下方完全懸空、結構體型巨大、單箇桿件重量大等特點.根據現場實際情況,選用液壓同步整體提升施工技術,製定瞭"地麵散件拼裝成整體,一次弔裝就位,部分散件空中拼裝"的施工方案.重點介紹瞭兩種鋼結構的提升繫統,通過有限元計算,指齣支座反力,各提升點最大允許位移差,提升過程鋼結構彊度、剛度及穩定性等均滿足要求.
중국련통과연중심판공루주루유4처련체강결구,분위량충:평면강결구정자량화공간강항가,구유하방완전현공、결구체형거대、단개간건중량대등특점.근거현장실제정황,선용액압동보정체제승시공기술,제정료"지면산건병장성정체,일차조장취위,부분산건공중병장"적시공방안.중점개소료량충강결구적제승계통,통과유한원계산,지출지좌반력,각제승점최대윤허위이차,제승과정강결구강도、강도급은정성등균만족요구.