热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2008年
19期
144-145
,共2页
有色金属%重力浇注%巴氏合金%脱壳率
有色金屬%重力澆註%巴氏閤金%脫殼率
유색금속%중력요주%파씨합금%탈각솔
对滑块浇注巴氏合金(白合金)容易产生脱壳的原因进行了分析研究,从工艺上、操作上制定了防止脱壳的措施,并对生产的滑块加工后进行了超声波探伤检查.结果表明,通过从工艺上、操作上采取适当的措施,可使滑块浇注巴氏合金产生脱壳的缺陷基本上得到解决
對滑塊澆註巴氏閤金(白閤金)容易產生脫殼的原因進行瞭分析研究,從工藝上、操作上製定瞭防止脫殼的措施,併對生產的滑塊加工後進行瞭超聲波探傷檢查.結果錶明,通過從工藝上、操作上採取適噹的措施,可使滑塊澆註巴氏閤金產生脫殼的缺陷基本上得到解決
대활괴요주파씨합금(백합금)용역산생탈각적원인진행료분석연구,종공예상、조작상제정료방지탈각적조시,병대생산적활괴가공후진행료초성파탐상검사.결과표명,통과종공예상、조작상채취괄당적조시,가사활괴요주파씨합금산생탈각적결함기본상득도해결