农业工程学报
農業工程學報
농업공정학보
2011年
7期
156-161
,共6页
徐秀英%张维强%杨和梅%齐晓丹
徐秀英%張維彊%楊和梅%齊曉丹
서수영%장유강%양화매%제효단
收获%运动学%设计%小型牧草收获机%双动%切割图%切割速比
收穫%運動學%設計%小型牧草收穫機%雙動%切割圖%切割速比
수획%운동학%설계%소형목초수획궤%쌍동%절할도%절할속비
为了解决小型牧草收获机单动刀工作时存在的平衡能力差、切割速度低、容易卡滞堵塞、难以适应柔性茎秆牧草的问题,进行了小型牧草收获机切割装置机构的改进设计;采用了双曲柄连杆机构带动两组刀片彼此反向切割的双动切割装置机构;通过其运动分析,得到了割刀位移、速度、加速度与曲柄转角的关系,并对动刀片结构参数和动刀间隙进行了优化设计.通过双动割刀切割速比的分析,绘制了不同切割速比下的双动割刀运动切割图,表明减少重割区和漏割区面积的最佳切割速比为K=1.6.研究结果为牧草切割装置的进一步优化设计和试验提供了参考依据.
為瞭解決小型牧草收穫機單動刀工作時存在的平衡能力差、切割速度低、容易卡滯堵塞、難以適應柔性莖稈牧草的問題,進行瞭小型牧草收穫機切割裝置機構的改進設計;採用瞭雙麯柄連桿機構帶動兩組刀片彼此反嚮切割的雙動切割裝置機構;通過其運動分析,得到瞭割刀位移、速度、加速度與麯柄轉角的關繫,併對動刀片結構參數和動刀間隙進行瞭優化設計.通過雙動割刀切割速比的分析,繪製瞭不同切割速比下的雙動割刀運動切割圖,錶明減少重割區和漏割區麵積的最佳切割速比為K=1.6.研究結果為牧草切割裝置的進一步優化設計和試驗提供瞭參攷依據.
위료해결소형목초수획궤단동도공작시존재적평형능력차、절할속도저、용역잡체도새、난이괄응유성경간목초적문제,진행료소형목초수획궤절할장치궤구적개진설계;채용료쌍곡병련간궤구대동량조도편피차반향절할적쌍동절할장치궤구;통과기운동분석,득도료할도위이、속도、가속도여곡병전각적관계,병대동도편결구삼수화동도간극진행료우화설계.통과쌍동할도절할속비적분석,회제료불동절할속비하적쌍동할도운동절할도,표명감소중할구화루할구면적적최가절할속비위K=1.6.연구결과위목초절할장치적진일보우화설계화시험제공료삼고의거.