中华实验外科杂志
中華實驗外科雜誌
중화실험외과잡지
CHINESE JOURNAL OF EXPERIMENTAL SURGERY
2008年
6期
691-693
,共3页
郝伟%姜明%钱淑琴%何帆%孟庆溪%张云昌%赵廷宝%胡蕴玉
郝偉%薑明%錢淑琴%何帆%孟慶溪%張雲昌%趙廷寶%鬍蘊玉
학위%강명%전숙금%하범%맹경계%장운창%조정보%호온옥
脂肪干细胞%胶原%骨%组织工程
脂肪榦細胞%膠原%骨%組織工程
지방간세포%효원%골%조직공정
Adipose-derived stem cells%Collagen%PLGA-β-TCP%Bone%Tissue engineering
目的 构建基于脂肪干细胞、Ⅰ型胶原凝胶以及聚乳酸聚乙醇酸-β-磷酸三钙支架(PLGA-β-TCP)的骨组织工程复合体并对其异位成骨进行研究.方法 设计构建脂肪干细胞-Ⅰ型胶原凝胶/PLGA-β-TCP复合体(A组),同时设立单纯细胞/PLGA-β-TCP材料复合体(B组)、单纯Ⅰ型胶原凝胶/PLGA-β-TCP复合体(C组)以及单纯PLGA-β-TCP支架材料(D组)作为对照.扫描电镜、相差显微镜观察细胞材料复合情况并对脂肪干细胞增殖以及成骨分化进行分析.体外成骨诱导培养2周后移植于自体股部肌袋,8周后取出,依次行放射学、组织学定性及半定量分析.结果 (1)体外成骨诱导2周,A组细胞增殖率慢于B组(P<0.05,n=4),但其细胞总数远高于后者(P<0.01,n=4).A组碱性磷酸酶(ALPase)活性、细胞外基质矿化程度均显著高于B组(P<0.01,n=4).A组细胞悬浮于Ⅰ型胶原凝胶并均匀分布于材料孔隙中而B组细胞仅见黏附于材料表面.(2)移植8周,X线片示A组高密度钙化影形成,B、C、D组未见有阳性结果.A组材料孔隙中均匀充满新生骨组织,可观察到骨小梁样结构.B组仅在少数孔隙中有类骨组织形成,同时伴有结缔组织长入.A组新生骨面积百分比显著高于B组(P<0.01,n=4).结论 通过应用Ⅰ型胶原凝胶来实现脂肪干细胞与PLGA-β-TCP多孔支架材料的均匀复合,能够有效促进脂肪干细胞在材料孔隙中的成骨分化及均质骨组织形成.
目的 構建基于脂肪榦細胞、Ⅰ型膠原凝膠以及聚乳痠聚乙醇痠-β-燐痠三鈣支架(PLGA-β-TCP)的骨組織工程複閤體併對其異位成骨進行研究.方法 設計構建脂肪榦細胞-Ⅰ型膠原凝膠/PLGA-β-TCP複閤體(A組),同時設立單純細胞/PLGA-β-TCP材料複閤體(B組)、單純Ⅰ型膠原凝膠/PLGA-β-TCP複閤體(C組)以及單純PLGA-β-TCP支架材料(D組)作為對照.掃描電鏡、相差顯微鏡觀察細胞材料複閤情況併對脂肪榦細胞增殖以及成骨分化進行分析.體外成骨誘導培養2週後移植于自體股部肌袋,8週後取齣,依次行放射學、組織學定性及半定量分析.結果 (1)體外成骨誘導2週,A組細胞增殖率慢于B組(P<0.05,n=4),但其細胞總數遠高于後者(P<0.01,n=4).A組堿性燐痠酶(ALPase)活性、細胞外基質礦化程度均顯著高于B組(P<0.01,n=4).A組細胞懸浮于Ⅰ型膠原凝膠併均勻分佈于材料孔隙中而B組細胞僅見黏附于材料錶麵.(2)移植8週,X線片示A組高密度鈣化影形成,B、C、D組未見有暘性結果.A組材料孔隙中均勻充滿新生骨組織,可觀察到骨小樑樣結構.B組僅在少數孔隙中有類骨組織形成,同時伴有結締組織長入.A組新生骨麵積百分比顯著高于B組(P<0.01,n=4).結論 通過應用Ⅰ型膠原凝膠來實現脂肪榦細胞與PLGA-β-TCP多孔支架材料的均勻複閤,能夠有效促進脂肪榦細胞在材料孔隙中的成骨分化及均質骨組織形成.
목적 구건기우지방간세포、Ⅰ형효원응효이급취유산취을순산-β-린산삼개지가(PLGA-β-TCP)적골조직공정복합체병대기이위성골진행연구.방법 설계구건지방간세포-Ⅰ형효원응효/PLGA-β-TCP복합체(A조),동시설립단순세포/PLGA-β-TCP재료복합체(B조)、단순Ⅰ형효원응효/PLGA-β-TCP복합체(C조)이급단순PLGA-β-TCP지가재료(D조)작위대조.소묘전경、상차현미경관찰세포재료복합정황병대지방간세포증식이급성골분화진행분석.체외성골유도배양2주후이식우자체고부기대,8주후취출,의차행방사학、조직학정성급반정량분석.결과 (1)체외성골유도2주,A조세포증식솔만우B조(P<0.05,n=4),단기세포총수원고우후자(P<0.01,n=4).A조감성린산매(ALPase)활성、세포외기질광화정도균현저고우B조(P<0.01,n=4).A조세포현부우Ⅰ형효원응효병균균분포우재료공극중이B조세포부견점부우재료표면.(2)이식8주,X선편시A조고밀도개화영형성,B、C、D조미견유양성결과.A조재료공극중균균충만신생골조직,가관찰도골소량양결구.B조부재소수공극중유류골조직형성,동시반유결체조직장입.A조신생골면적백분비현저고우B조(P<0.01,n=4).결론 통과응용Ⅰ형효원응효래실현지방간세포여PLGA-β-TCP다공지가재료적균균복합,능구유효촉진지방간세포재재료공극중적성골분화급균질골조직형성.
Objective To explore the in vitro and in vivo osteogenesis of a novel biomimetic construct fabricated by using collagen I gel to suspend rabbit adipose-derived stem cells (ASCs) into a porous PLGA-β-TCP scaffold (ASCs-COL/PLGA-β-TCP).Methods Following groups were set up: ASCs-COL/PLGA-β-TCP composite group (group A),ASCs and PLGA-β-TCP group (group B),acellular collagen I gel and PLGA-β-TCP group (group C),PLGA-β-TCP scaffold (group D).Composites were cultured in vitro for 2 weeks under osteogenic medium and then implanted into the autologous muscular intervals for 8 weeks.Results During in vitro culture,ALPase activity and extracellular matrix mineralization in group A was significantly greater than in group B (P<0.01,n=4).After in vivo implantation,the calcification level was radiographically evident in group A,but whereas no apparent calcification was observed in groups B,C and D (n=4).In group A,woven bone with a trabecular structure was formed,but only osteiod tissue was observed in group B.Bone forming area in group A was significantly larger than in group B (P<0.01,n=4).No bone formation was observed in groups C or D (n=4).Conclusion By using collagen I gel to suspend ASCs into porous PLGA-β-TCP scaffold,osteogenic differentiation of ASCs can be improved and homogeneous bone tissue can be successfully formed in vivo.