电焊机
電銲機
전한궤
ELECTRIC WELDING MACHINE
2007年
10期
14-18
,共5页
祝文卉%曾维慷%王敬和%张湘君
祝文卉%曾維慷%王敬和%張湘君
축문훼%증유강%왕경화%장상군
45#钢%盘件%惯性摩擦焊
45#鋼%盤件%慣性摩抆銲
45#강%반건%관성마찰한
介绍了45#钢盘类零件的惯性摩擦焊工艺参数、装夹状态、焊接工艺过程以及焊接过程中各相关参数的实时变化情况;着重分析了焊接部位壁厚、主要焊接工艺参数(能量、压力)对焊接缩短量、接头强度和变形的影响规律;统计了在试验工装夹具状态下,盘类零件惯性摩擦焊时,辐板和外径位置的变形规律;分析了产生上述变形的主要原因,并提出相应的解决措施.
介紹瞭45#鋼盤類零件的慣性摩抆銲工藝參數、裝夾狀態、銲接工藝過程以及銲接過程中各相關參數的實時變化情況;著重分析瞭銲接部位壁厚、主要銲接工藝參數(能量、壓力)對銲接縮短量、接頭彊度和變形的影響規律;統計瞭在試驗工裝夾具狀態下,盤類零件慣性摩抆銲時,輻闆和外徑位置的變形規律;分析瞭產生上述變形的主要原因,併提齣相應的解決措施.
개소료45#강반류령건적관성마찰한공예삼수、장협상태、한접공예과정이급한접과정중각상관삼수적실시변화정황;착중분석료한접부위벽후、주요한접공예삼수(능량、압력)대한접축단량、접두강도화변형적영향규률;통계료재시험공장협구상태하,반류령건관성마찰한시,복판화외경위치적변형규률;분석료산생상술변형적주요원인,병제출상응적해결조시.