上海金属
上海金屬
상해금속
SHANGHAI METALS
2007年
1期
29-33
,共5页
4Cr2MoWVNi模具钢%离子渗氮%耐磨性%模具使用寿命
4Cr2MoWVNi模具鋼%離子滲氮%耐磨性%模具使用壽命
4Cr2MoWVNi모구강%리자삼담%내마성%모구사용수명
通过对4Cr2MoWVNi钢进行离子渗氮工艺处理,研究了温度、时间对渗层组织、耐磨性能的影响.结果表明,采用合适的处理温度和时间,可以得到最佳的渗氮层深及表面硬度,在保证一定的渗氮层深条件下,4Cr2MoWVNi钢的热耐磨性能明显提高,使模具使用寿命大幅度提高.
通過對4Cr2MoWVNi鋼進行離子滲氮工藝處理,研究瞭溫度、時間對滲層組織、耐磨性能的影響.結果錶明,採用閤適的處理溫度和時間,可以得到最佳的滲氮層深及錶麵硬度,在保證一定的滲氮層深條件下,4Cr2MoWVNi鋼的熱耐磨性能明顯提高,使模具使用壽命大幅度提高.
통과대4Cr2MoWVNi강진행리자삼담공예처리,연구료온도、시간대삼층조직、내마성능적영향.결과표명,채용합괄적처리온도화시간,가이득도최가적삼담층심급표면경도,재보증일정적삼담층심조건하,4Cr2MoWVNi강적열내마성능명현제고,사모구사용수명대폭도제고.