无机化学学报
無機化學學報
무궤화학학보
JOURNAL OF INORGANIC CHEMISTRY
2009年
6期
1062-1066
,共5页
郝素娥%王威力%王春艳%付东升%李佳龙
郝素娥%王威力%王春豔%付東升%李佳龍
학소아%왕위력%왕춘염%부동승%리가룡
钛酸钡%稀土%导电粉
鈦痠鋇%稀土%導電粉
태산패%희토%도전분
采用溶胶-凝胶法制备了纯BaTiO3粉体,并以La、Pr、Nd、Sm、Gd和Er等稀土元素通过液相掺杂、气相掺杂和液-气共掺3种不同的方式对其进行改性,以提高BaTiO3粉体的导电性.实验结果表明:各种稀土均可降低BaTiO3粉体的电阻率,效果最好的是Sm.不同掺杂方式中液-气共掺的效果最好,通过液相掺杂、气相掺杂和液-气共掺,BaTiO2粉体的电阻率由4.30×109Ω·m分别降至2.38×105,4.34×104和35.4 Ω·m.XRD、SEM、FTIR分析表明.液相掺杂时进入BaTiO3粉体的稀土元素主要集中在晶界处,而气相掺杂后稀土元素主要进入晶格内部,可能取代了Ti4+在晶格中的位置.半径较小的稀土元素更容易迁移而偏离钛氧八面体的中心位置,由此导致稀土掺杂后BaTiO3粉体的电阻率显著降低.
採用溶膠-凝膠法製備瞭純BaTiO3粉體,併以La、Pr、Nd、Sm、Gd和Er等稀土元素通過液相摻雜、氣相摻雜和液-氣共摻3種不同的方式對其進行改性,以提高BaTiO3粉體的導電性.實驗結果錶明:各種稀土均可降低BaTiO3粉體的電阻率,效果最好的是Sm.不同摻雜方式中液-氣共摻的效果最好,通過液相摻雜、氣相摻雜和液-氣共摻,BaTiO2粉體的電阻率由4.30×109Ω·m分彆降至2.38×105,4.34×104和35.4 Ω·m.XRD、SEM、FTIR分析錶明.液相摻雜時進入BaTiO3粉體的稀土元素主要集中在晶界處,而氣相摻雜後稀土元素主要進入晶格內部,可能取代瞭Ti4+在晶格中的位置.半徑較小的稀土元素更容易遷移而偏離鈦氧八麵體的中心位置,由此導緻稀土摻雜後BaTiO3粉體的電阻率顯著降低.
채용용효-응효법제비료순BaTiO3분체,병이La、Pr、Nd、Sm、Gd화Er등희토원소통과액상참잡、기상참잡화액-기공참3충불동적방식대기진행개성,이제고BaTiO3분체적도전성.실험결과표명:각충희토균가강저BaTiO3분체적전조솔,효과최호적시Sm.불동참잡방식중액-기공참적효과최호,통과액상참잡、기상참잡화액-기공참,BaTiO2분체적전조솔유4.30×109Ω·m분별강지2.38×105,4.34×104화35.4 Ω·m.XRD、SEM、FTIR분석표명.액상참잡시진입BaTiO3분체적희토원소주요집중재정계처,이기상참잡후희토원소주요진입정격내부,가능취대료Ti4+재정격중적위치.반경교소적희토원소경용역천이이편리태양팔면체적중심위치,유차도치희토참잡후BaTiO3분체적전조솔현저강저.