实验力学
實驗力學
실험역학
JOURNAL OF EXPERIMENTAL MECHANICS
2010年
1期
55-60
,共6页
聚氨酯泡沫%静水压试验%三轴压缩%本构关系
聚氨酯泡沫%靜水壓試驗%三軸壓縮%本構關繫
취안지포말%정수압시험%삼축압축%본구관계
polyurethane foam%hydrostatic compressive test%triaxial compression%constitutive relation
泡沫材料在多轴载荷下的力学性能是工程中非常关心的问题.利用土壤的三轴压缩试验装置,通过试验方法的改进,提出了一种体应变测定和修正的方法,对硬质聚氨酯泡沫材料的静水压力特性进行了研究,得到了一些有价值的数据和结论.研究表明:在准静态静水压加载条件下,该材料的应力-应变曲线明显地分为弹性段、塑性段和压实段,且屈服强度比单向压缩时略大、压实应变略小.最后通过不同高度的试样对比试验,对聚氨酯泡沫材料的不均匀变形和弯曲的原因进行了分析和比较,指出了试验时应该注意的问题.
泡沫材料在多軸載荷下的力學性能是工程中非常關心的問題.利用土壤的三軸壓縮試驗裝置,通過試驗方法的改進,提齣瞭一種體應變測定和脩正的方法,對硬質聚氨酯泡沫材料的靜水壓力特性進行瞭研究,得到瞭一些有價值的數據和結論.研究錶明:在準靜態靜水壓加載條件下,該材料的應力-應變麯線明顯地分為彈性段、塑性段和壓實段,且屈服彊度比單嚮壓縮時略大、壓實應變略小.最後通過不同高度的試樣對比試驗,對聚氨酯泡沫材料的不均勻變形和彎麯的原因進行瞭分析和比較,指齣瞭試驗時應該註意的問題.
포말재료재다축재하하적역학성능시공정중비상관심적문제.이용토양적삼축압축시험장치,통과시험방법적개진,제출료일충체응변측정화수정적방법,대경질취안지포말재료적정수압력특성진행료연구,득도료일사유개치적수거화결론.연구표명:재준정태정수압가재조건하,해재료적응력-응변곡선명현지분위탄성단、소성단화압실단,차굴복강도비단향압축시략대、압실응변략소.최후통과불동고도적시양대비시험,대취안지포말재료적불균균변형화만곡적원인진행료분석화비교,지출료시험시응해주의적문제.
Mechanical behavior of foam under multi-axial loads has attracted much attention in engineering practice. A new experimental method for volumetric strain measurement of polyurethane (PU) foam materials was put forward by utilizing soil tri-axial compressive device. Mechanical properties of a kind of closed-cell rigid PU foam under hydrostatic loading were investigated, and some useful parameters were obtained. Results show that the shape of hydrostatic pressure versus nominal volumetric strain curve of the PU foam is an initial elastic regime followed by a long plastic plateau region and then a rapid increase with the foam densifying. And the foam under hydrostatic compression has a slightly greater plateau stress and a smaller densification strain than that under uniaxial compression. At last, some reasons resulting in the PU foam nonuniform deformation and bending of foam sample were analyzed through contrastive tests for two types of PU foam samples with different heights, which influence the experimental results greatly.