土木工程学报
土木工程學報
토목공정학보
CHINA CIVIL ENGINEERING JOURNAL
2007年
6期
7-13,53
,共8页
钱稼茹%赵作周%段安%夏祖讽%王明弹
錢稼茹%趙作週%段安%夏祖諷%王明彈
전가여%조작주%단안%하조풍%왕명탄
预应力混凝土安全壳%半球形穹顶%1∶10模型%拟动力试验%设计地震水平SL-2
預應力混凝土安全殼%半毬形穹頂%1∶10模型%擬動力試驗%設計地震水平SL-2
예응력혼응토안전각%반구형궁정%1∶10모형%의동력시험%설계지진수평SL-2
由半球形穹顶、筒体和2根扶壁柱组成的预应力混凝土安全壳是我国最新开发的CNP1000先进核电厂的标志建筑物.为验证其在峰值加速度为0.2 g的设计地震水平SL-2工况下的安全,为该安全壳的技术系统集成提供模型结构动态试验依据,完成了该安全壳一个1∶10预应力混凝土模型的单自由度拟动力试验.试验分两个阶段,加载方向分别与安全壳的扶壁柱连线垂直和一致;在有限元分析的基础上,确定了两个阶段试验单自由度体系的理论质量.采用人工波作为地震输入;每个阶段分别进行3个工况试验,地震峰值加速度分别为1 g、2 g和3 g,根据相似关系,对应于实体结构分别为0.1 g、0.2 g和0.3 g;模型结构阻尼比分别取为0.02、0.05和0.05.结果表明,在峰值加速度2 g地震作用下,筒体底部个别测点达到混凝土开裂应变,模型等效抗侧刚度降低仅5%:在峰值加速度3 g地震作用下,除筒体底部外的筒壁测点的应变都小于混凝土开裂应变,模型等效抗侧刚度降低约14%,结构处于弹性阶段.半球形穹顶安全壳具有大的抗震安全储备.
由半毬形穹頂、筒體和2根扶壁柱組成的預應力混凝土安全殼是我國最新開髮的CNP1000先進覈電廠的標誌建築物.為驗證其在峰值加速度為0.2 g的設計地震水平SL-2工況下的安全,為該安全殼的技術繫統集成提供模型結構動態試驗依據,完成瞭該安全殼一箇1∶10預應力混凝土模型的單自由度擬動力試驗.試驗分兩箇階段,加載方嚮分彆與安全殼的扶壁柱連線垂直和一緻;在有限元分析的基礎上,確定瞭兩箇階段試驗單自由度體繫的理論質量.採用人工波作為地震輸入;每箇階段分彆進行3箇工況試驗,地震峰值加速度分彆為1 g、2 g和3 g,根據相似關繫,對應于實體結構分彆為0.1 g、0.2 g和0.3 g;模型結構阻尼比分彆取為0.02、0.05和0.05.結果錶明,在峰值加速度2 g地震作用下,筒體底部箇彆測點達到混凝土開裂應變,模型等效抗側剛度降低僅5%:在峰值加速度3 g地震作用下,除筒體底部外的筒壁測點的應變都小于混凝土開裂應變,模型等效抗側剛度降低約14%,結構處于彈性階段.半毬形穹頂安全殼具有大的抗震安全儲備.
유반구형궁정、통체화2근부벽주조성적예응력혼응토안전각시아국최신개발적CNP1000선진핵전엄적표지건축물.위험증기재봉치가속도위0.2 g적설계지진수평SL-2공황하적안전,위해안전각적기술계통집성제공모형결구동태시험의거,완성료해안전각일개1∶10예응력혼응토모형적단자유도의동력시험.시험분량개계단,가재방향분별여안전각적부벽주련선수직화일치;재유한원분석적기출상,학정료량개계단시험단자유도체계적이론질량.채용인공파작위지진수입;매개계단분별진행3개공황시험,지진봉치가속도분별위1 g、2 g화3 g,근거상사관계,대응우실체결구분별위0.1 g、0.2 g화0.3 g;모형결구조니비분별취위0.02、0.05화0.05.결과표명,재봉치가속도2 g지진작용하,통체저부개별측점체도혼응토개렬응변,모형등효항측강도강저부5%:재봉치가속도3 g지진작용하,제통체저부외적통벽측점적응변도소우혼응토개렬응변,모형등효항측강도강저약14%,결구처우탄성계단.반구형궁정안전각구유대적항진안전저비.