热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
6期
170-172
,共3页
徐斌%尚利平%王海旺%张鹏
徐斌%尚利平%王海旺%張鵬
서빈%상리평%왕해왕%장붕
形变温度%形变量%形变率%形变淬火温度%回火温度
形變溫度%形變量%形變率%形變淬火溫度%迴火溫度
형변온도%형변량%형변솔%형변쉬화온도%회화온도
利用壳类锻件成型时形变量大、形变率大的特点,并在成型后的高温回复亚结构多边化完成时进行淬火.本文对40Cr壳类精密锻件形变热处理工艺参数进行了研究.结果表明,力学性能不仅满足还超过了产品的原热处理性能要求,提高了生产效率,降低了产品成本.
利用殼類鍛件成型時形變量大、形變率大的特點,併在成型後的高溫迴複亞結構多邊化完成時進行淬火.本文對40Cr殼類精密鍛件形變熱處理工藝參數進行瞭研究.結果錶明,力學性能不僅滿足還超過瞭產品的原熱處理性能要求,提高瞭生產效率,降低瞭產品成本.
이용각류단건성형시형변량대、형변솔대적특점,병재성형후적고온회복아결구다변화완성시진행쉬화.본문대40Cr각류정밀단건형변열처리공예삼수진행료연구.결과표명,역학성능불부만족환초과료산품적원열처이성능요구,제고료생산효솔,강저료산품성본.