化工新型材料
化工新型材料
화공신형재료
NEW CHEMICAL MATERIALS
2007年
7期
46-48
,共3页
有机硅树脂%烷氧基硅烷%室温固化
有機硅樹脂%烷氧基硅烷%室溫固化
유궤규수지%완양기규완%실온고화
以甲基和苯基烷氧基硅烷为原料,采用水解-缩聚的方法合成了有机硅树脂,并研究了合成硅树脂的工艺条件对硅树脂性能的影响.结果表明,一定配方,水解温度为65℃,反应时间为4~5h时,可合成出易溶于二甲苯、易成膜、适于作涂料基体树脂的有机硅树脂;红外光谱(IR)表明,合成的硅树脂含有端羟基,加入硅氮低聚物后,能室温固化;凝胶渗透色谱(GPC)分析表明,所合成的有机硅树脂分子量在6500左右;热失重(TG)表明,硅树脂有很好的耐热性能,在500℃时的失重仅为7.12%;机械性能及交流阻抗分析表明,300℃下,合成硅树脂所制清漆的机械物理性能及抗渗性能优良,可以用于制备耐高温涂层.
以甲基和苯基烷氧基硅烷為原料,採用水解-縮聚的方法閤成瞭有機硅樹脂,併研究瞭閤成硅樹脂的工藝條件對硅樹脂性能的影響.結果錶明,一定配方,水解溫度為65℃,反應時間為4~5h時,可閤成齣易溶于二甲苯、易成膜、適于作塗料基體樹脂的有機硅樹脂;紅外光譜(IR)錶明,閤成的硅樹脂含有耑羥基,加入硅氮低聚物後,能室溫固化;凝膠滲透色譜(GPC)分析錶明,所閤成的有機硅樹脂分子量在6500左右;熱失重(TG)錶明,硅樹脂有很好的耐熱性能,在500℃時的失重僅為7.12%;機械性能及交流阻抗分析錶明,300℃下,閤成硅樹脂所製清漆的機械物理性能及抗滲性能優良,可以用于製備耐高溫塗層.
이갑기화분기완양기규완위원료,채용수해-축취적방법합성료유궤규수지,병연구료합성규수지적공예조건대규수지성능적영향.결과표명,일정배방,수해온도위65℃,반응시간위4~5h시,가합성출역용우이갑분、역성막、괄우작도료기체수지적유궤규수지;홍외광보(IR)표명,합성적규수지함유단간기,가입규담저취물후,능실온고화;응효삼투색보(GPC)분석표명,소합성적유궤규수지분자량재6500좌우;열실중(TG)표명,규수지유흔호적내열성능,재500℃시적실중부위7.12%;궤계성능급교류조항분석표명,300℃하,합성규수지소제청칠적궤계물이성능급항삼성능우량,가이용우제비내고온도층.