特殊钢
特殊鋼
특수강
SPECIAL STEEL
2005年
1期
27-29
,共3页
李壮%周晓光%王佳夫%吴迪%张平礼
李壯%週曉光%王佳伕%吳迪%張平禮
리장%주효광%왕가부%오적%장평례
计算机模拟%热轧带%C-Mn钢%奥氏体晶粒尺寸
計算機模擬%熱軋帶%C-Mn鋼%奧氏體晶粒呎吋
계산궤모의%열알대%C-Mn강%오씨체정립척촌
在研究板带控轧控冷过程中钢中显微组织演变过程奥氏体再结晶、碳氮化合物析出、奥氏体相变和组织性能对应关系的物理冶金模型的基础上,通过Gleeble-1500热模拟机和计算机模拟计算得出成分(%)0.16C,0.06Si,1.30Mn钢在1 173~1 081 K经7道次热变形后奥氏体晶粒尺寸为43 μm,同时实测7道次变形后轧钢组织中奥氏体尺寸为38 μm,相对误差13%.计算机模拟计算的奥氏体再结晶晶粒尺寸与实测结果吻合较好.
在研究闆帶控軋控冷過程中鋼中顯微組織縯變過程奧氏體再結晶、碳氮化閤物析齣、奧氏體相變和組織性能對應關繫的物理冶金模型的基礎上,通過Gleeble-1500熱模擬機和計算機模擬計算得齣成分(%)0.16C,0.06Si,1.30Mn鋼在1 173~1 081 K經7道次熱變形後奧氏體晶粒呎吋為43 μm,同時實測7道次變形後軋鋼組織中奧氏體呎吋為38 μm,相對誤差13%.計算機模擬計算的奧氏體再結晶晶粒呎吋與實測結果吻閤較好.
재연구판대공알공랭과정중강중현미조직연변과정오씨체재결정、탄담화합물석출、오씨체상변화조직성능대응관계적물리야금모형적기출상,통과Gleeble-1500열모의궤화계산궤모의계산득출성분(%)0.16C,0.06Si,1.30Mn강재1 173~1 081 K경7도차열변형후오씨체정립척촌위43 μm,동시실측7도차변형후알강조직중오씨체척촌위38 μm,상대오차13%.계산궤모의계산적오씨체재결정정립척촌여실측결과문합교호.