南昌航空工业学院学报(自然科学版)
南昌航空工業學院學報(自然科學版)
남창항공공업학원학보(자연과학판)
JOURNAL OF NANCHANG INSTITUTE OF AERONAUTICAL TECHNOLOGY(NATURAL SCIENCE)
2006年
4期
38-42,47
,共6页
黎军顽%江五贵%汤井伦%赵晟
黎軍頑%江五貴%湯井倫%趙晟
려군완%강오귀%탕정륜%조성
准连续介质力学%纳米压痕%纳米硬度%尺寸效应
準連續介質力學%納米壓痕%納米硬度%呎吋效應
준련속개질역학%납미압흔%납미경도%척촌효응
采用准连续介质力学的数值方法,模拟了单晶铜纳米压痕试验中的初始塑性变形过程, 获得了压头在不同压深时的载荷-压深的加载和卸载曲线,然后根据Oliver-Pharr方法计算出压头在不同压深时单晶铜的接触刚度、纳米硬度,并将获得的计算结果与相关文献的试验结果相比较.研究发现:单晶铜的接触刚度-位移曲线呈线性关系,纳米硬度-位移曲线存在尺寸效应现象,计算获得的纳米硬度值为0.755±0.027Gpa,这些结果与文献中实验获得的结果非常吻合,表明使用该方法预测材料纳米硬度是非常有效、正确和可行的.
採用準連續介質力學的數值方法,模擬瞭單晶銅納米壓痕試驗中的初始塑性變形過程, 穫得瞭壓頭在不同壓深時的載荷-壓深的加載和卸載麯線,然後根據Oliver-Pharr方法計算齣壓頭在不同壓深時單晶銅的接觸剛度、納米硬度,併將穫得的計算結果與相關文獻的試驗結果相比較.研究髮現:單晶銅的接觸剛度-位移麯線呈線性關繫,納米硬度-位移麯線存在呎吋效應現象,計算穫得的納米硬度值為0.755±0.027Gpa,這些結果與文獻中實驗穫得的結果非常吻閤,錶明使用該方法預測材料納米硬度是非常有效、正確和可行的.
채용준련속개질역학적수치방법,모의료단정동납미압흔시험중적초시소성변형과정, 획득료압두재불동압심시적재하-압심적가재화사재곡선,연후근거Oliver-Pharr방법계산출압두재불동압심시단정동적접촉강도、납미경도,병장획득적계산결과여상관문헌적시험결과상비교.연구발현:단정동적접촉강도-위이곡선정선성관계,납미경도-위이곡선존재척촌효응현상,계산획득적납미경도치위0.755±0.027Gpa,저사결과여문헌중실험획득적결과비상문합,표명사용해방법예측재료납미경도시비상유효、정학화가행적.