表面技术
錶麵技術
표면기술
SURFACE TECHNOLOGY
2010年
1期
103-105
,共3页
曾宪光%喻兰英%李新跃%郑兴文
曾憲光%喻蘭英%李新躍%鄭興文
증헌광%유란영%리신약%정흥문
磷酸盐%胶粘剂%高温
燐痠鹽%膠粘劑%高溫
린산염%효점제%고온
Phosphate%Adhesives%High temperature
以磷酸、氢氧化铝、氧化铜等为主要原料,拟制备出具有高粘结性且耐高温氧化的胶粘剂.采用正交试验方法优选出配方,讨论了氧化铜粒径、固化温度、固化时间、氢氧化铝对其粘结性能的影响.验证实验表明:开发的新型高温磷酸盐胶粘剂,制备工艺简单,最佳固化温度为120 ℃,最佳固化时间为4 h;该胶粘剂粘结性能好,耐高温,呈淡黄青色,具有广阔的应用前景.
以燐痠、氫氧化鋁、氧化銅等為主要原料,擬製備齣具有高粘結性且耐高溫氧化的膠粘劑.採用正交試驗方法優選齣配方,討論瞭氧化銅粒徑、固化溫度、固化時間、氫氧化鋁對其粘結性能的影響.驗證實驗錶明:開髮的新型高溫燐痠鹽膠粘劑,製備工藝簡單,最佳固化溫度為120 ℃,最佳固化時間為4 h;該膠粘劑粘結性能好,耐高溫,呈淡黃青色,具有廣闊的應用前景.
이린산、경양화려、양화동등위주요원료,의제비출구유고점결성차내고온양화적효점제.채용정교시험방법우선출배방,토론료양화동립경、고화온도、고화시간、경양화려대기점결성능적영향.험증실험표명:개발적신형고온린산염효점제,제비공예간단,최가고화온도위120 ℃,최가고화시간위4 h;해효점제점결성능호,내고온,정담황청색,구유엄활적응용전경.
Some raw materials such as phosphoric acid, aluminum hydroxide and copper oxide were mainly used to prepare adhesive with high bond and heat-resisting, a optimal adhesive formulation was selected through orthogonal experimental method. The effect of copper oxide particle size, curing temperature, curing time and aluminum hydroxide on the bonding properties was discussed. Results show that new phosphate adhesive is provided with simple preparation process, good adhesion, heat-resisting and broad application prospects, and it appeares pale yellow green with curing temperature of 120 ℃ and curing time of 4 h.