弹箭与制导学报
彈箭與製導學報
탄전여제도학보
JOURNAL OF PROJECTILES, ROCKETS, MISSILES AND GUIDANCE
2010年
2期
114-116
,共3页
小尺寸爆炸箔%加速膛%匹配%起爆阈值电流
小呎吋爆炸箔%加速膛%匹配%起爆閾值電流
소척촌폭작박%가속당%필배%기폭역치전류
small scale exploding foil%barrel%match%threshold electrical current
为研究爆炸箔桥区尺寸与加速膛的匹配关系,对小尺寸爆炸箔与加速膛匹配的雷管进行了发火试验和升降法试验.试验结果表明爆炸箔的桥区尺寸与加速膛内孔径存在一个较佳的匹配,对桥区尺寸0.3mm×0.3mm与Φ0.45mm内径加速膛匹配的雷管进行升降法试验,发现比桥区尺寸0.4mm×0.4mm爆炸箔与Φ0.6mm内径加速膛匹配雷管的50%发火电流降低了近300A,由此说明小尺寸爆炸箔与加速膛内孔径合理匹配的情况下,可以降低冲击片雷管的起爆阈值,为实现引爆系统的小型化提供基础.
為研究爆炸箔橋區呎吋與加速膛的匹配關繫,對小呎吋爆炸箔與加速膛匹配的雷管進行瞭髮火試驗和升降法試驗.試驗結果錶明爆炸箔的橋區呎吋與加速膛內孔徑存在一箇較佳的匹配,對橋區呎吋0.3mm×0.3mm與Φ0.45mm內徑加速膛匹配的雷管進行升降法試驗,髮現比橋區呎吋0.4mm×0.4mm爆炸箔與Φ0.6mm內徑加速膛匹配雷管的50%髮火電流降低瞭近300A,由此說明小呎吋爆炸箔與加速膛內孔徑閤理匹配的情況下,可以降低遲擊片雷管的起爆閾值,為實現引爆繫統的小型化提供基礎.
위연구폭작박교구척촌여가속당적필배관계,대소척촌폭작박여가속당필배적뢰관진행료발화시험화승강법시험.시험결과표명폭작박적교구척촌여가속당내공경존재일개교가적필배,대교구척촌0.3mm×0.3mm여Φ0.45mm내경가속당필배적뢰관진행승강법시험,발현비교구척촌0.4mm×0.4mm폭작박여Φ0.6mm내경가속당필배뢰관적50%발화전류강저료근300A,유차설명소척촌폭작박여가속당내공경합리필배적정황하,가이강저충격편뢰관적기폭역치,위실현인폭계통적소형화제공기출.
To study the matching relation between the exploding foil bridge size and the barrel,the ignition tests and the up-down experiments have been done.Results show that a preferred matching relation between inner diameter and bridge size was obtained.The up and down experiments of 0.3mm×0.3mm exploding foils matching with Φ0.45mm barrels were carried out.Results show that the threshold electrical current is almost lowered 300A.Accordingly,when small scale exploding foil and the barrel are preferably matched,the threshold voltage of slapper detonators can be lowered.