电焊机
電銲機
전한궤
ELECTRIC WELDING MACHINE
2012年
9期
30-34
,共5页
朱冬妹%王惜宝%熊亮同%王毅飞
硃鼕妹%王惜寶%熊亮同%王毅飛
주동매%왕석보%웅량동%왕의비
板材温度%等离子熔覆%Fe3Al
闆材溫度%等離子鎔覆%Fe3Al
판재온도%등리자용복%Fe3Al
针对等离子熔覆产生Fe3Al金属间化合物过程中,不同板材温度对熔覆过程中的表面质量、组织形态及影响规律进行了研究,研究发现随着熔覆过程中温度的增加,熔覆层颗粒越来越细小,熔覆层组织中的Fe3Al晶须的数量和大小有所增加.并通过熔覆层硬度分析得出板材温度控制在80℃时组织维氏硬度能达到铁基的1.67倍.
針對等離子鎔覆產生Fe3Al金屬間化閤物過程中,不同闆材溫度對鎔覆過程中的錶麵質量、組織形態及影響規律進行瞭研究,研究髮現隨著鎔覆過程中溫度的增加,鎔覆層顆粒越來越細小,鎔覆層組織中的Fe3Al晶鬚的數量和大小有所增加.併通過鎔覆層硬度分析得齣闆材溫度控製在80℃時組織維氏硬度能達到鐵基的1.67倍.
침대등리자용복산생Fe3Al금속간화합물과정중,불동판재온도대용복과정중적표면질량、조직형태급영향규률진행료연구,연구발현수착용복과정중온도적증가,용복층과립월래월세소,용복층조직중적Fe3Al정수적수량화대소유소증가.병통과용복층경도분석득출판재온도공제재80℃시조직유씨경도능체도철기적1.67배.