材料导报
材料導報
재료도보
MATERIALS REVIEW
2009年
14期
12-14
,共3页
电爆炸喷涂%复合涂层%结合强度%硬度%表面粗糙度
電爆炸噴塗%複閤塗層%結閤彊度%硬度%錶麵粗糙度
전폭작분도%복합도층%결합강도%경도%표면조조도
wire explosion spraying%composite coating%bonding strength%hardness%surface roughness
为了提高铝合金工件内表面的耐磨损能力,采用电爆炸喷涂技术在LY12基体上进行了制备钼和80号高碳钢复合涂层的实验研究.通过钼/高碳钢交替喷涂制备了钼和高碳钢的喷涂次数比分别为1:1和1:2的复合涂层,并对涂层进行了检测.结果表明,电爆炸喷涂的复合涂层形成了良好的冶金结合,涂层具有硬度高、抗磨损、粗糙度小、结合强度好的优点,层数比为1:2时涂层的性能更加优越.
為瞭提高鋁閤金工件內錶麵的耐磨損能力,採用電爆炸噴塗技術在LY12基體上進行瞭製備鉬和80號高碳鋼複閤塗層的實驗研究.通過鉬/高碳鋼交替噴塗製備瞭鉬和高碳鋼的噴塗次數比分彆為1:1和1:2的複閤塗層,併對塗層進行瞭檢測.結果錶明,電爆炸噴塗的複閤塗層形成瞭良好的冶金結閤,塗層具有硬度高、抗磨損、粗糙度小、結閤彊度好的優點,層數比為1:2時塗層的性能更加優越.
위료제고려합금공건내표면적내마손능력,채용전폭작분도기술재LY12기체상진행료제비목화80호고탄강복합도층적실험연구.통과목/고탄강교체분도제비료목화고탄강적분도차수비분별위1:1화1:2적복합도층,병대도층진행료검측.결과표명,전폭작분도적복합도층형성료량호적야금결합,도층구유경도고、항마손、조조도소、결합강도호적우점,층수비위1:2시도층적성능경가우월.
In order to enhance wear-resistant ability of inner surface of aluminum alloy work piece, molybdenum and high-carbon steel (0. 8%C) composite coating is prepared on LY12 substrate by wire explosion spraying method. The composite coatings are sprayed according to the layer ratio of molybdenum and high-carbon steel is 1 : 1 and 1 : 2. These coatings' characteristics are analyzed. It shows that metallurgy junction is formed well between layers in coatings. Hardness, anti-attrition merit, bonding strength and surface roughness of the coating are good. The characteristics of coating with layer ratio of 1 : 2 is superior to that of 1 : 1.