红外
紅外
홍외
INFRARED
2011年
2期
1-4
,共4页
张艳超%赵建%孙强%刘建卓%曲锋
張豔超%趙建%孫彊%劉建卓%麯鋒
장염초%조건%손강%류건탁%곡봉
红外热像仪%非致冷红外焦平面成像系统%辐射测温%探测器温度效应
紅外熱像儀%非緻冷紅外焦平麵成像繫統%輻射測溫%探測器溫度效應
홍외열상의%비치랭홍외초평면성상계통%복사측온%탐측기온도효응
为了消除由非致冷红外焦平面自身温度变化造成的辐射测温偏差,提出了一种基于G-t(黑体辐射灰度-探测器工作温度)标准曲线进行辐射测温的新方法.该方法从热辐射理论和热像仪测温原理出发,利用实验测得的G-t标准温度关系曲线,并结合灰体表面真实温度的计算公式,最终实现了非致冷红外焦平面成像系统的高精度辐射测温.实验结果表明,当探测器的工作温度在26℃~35℃、黑体温度在35℃(308K)~45℃(318K)时,绝对温度偏差低于1K,有效地消除了非致冷红外焦平面自身的温度变化对辐射测温精度的影响.
為瞭消除由非緻冷紅外焦平麵自身溫度變化造成的輻射測溫偏差,提齣瞭一種基于G-t(黑體輻射灰度-探測器工作溫度)標準麯線進行輻射測溫的新方法.該方法從熱輻射理論和熱像儀測溫原理齣髮,利用實驗測得的G-t標準溫度關繫麯線,併結閤灰體錶麵真實溫度的計算公式,最終實現瞭非緻冷紅外焦平麵成像繫統的高精度輻射測溫.實驗結果錶明,噹探測器的工作溫度在26℃~35℃、黑體溫度在35℃(308K)~45℃(318K)時,絕對溫度偏差低于1K,有效地消除瞭非緻冷紅外焦平麵自身的溫度變化對輻射測溫精度的影響.
위료소제유비치랭홍외초평면자신온도변화조성적복사측온편차,제출료일충기우G-t(흑체복사회도-탐측기공작온도)표준곡선진행복사측온적신방법.해방법종열복사이론화열상의측온원리출발,이용실험측득적G-t표준온도관계곡선,병결합회체표면진실온도적계산공식,최종실현료비치랭홍외초평면성상계통적고정도복사측온.실험결과표명,당탐측기적공작온도재26℃~35℃、흑체온도재35℃(308K)~45℃(318K)시,절대온도편차저우1K,유효지소제료비치랭홍외초평면자신적온도변화대복사측온정도적영향.