中南林业科技大学学报
中南林業科技大學學報
중남임업과기대학학보
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF FORESTRY & TECHNOLOGY
2012年
1期
139-143
,共5页
软模板法%介孔%碳化钨/炭纳米复合材料
軟模闆法%介孔%碳化鎢/炭納米複閤材料
연모판법%개공%탄화오/탄납미복합재료
soft-template%mesoporous%WC/C nanocomposites
碳化钨作为一种潜在的催化剂可广泛应用于电化学催化和有机合成反应,本文通过一种简单可行的“软模板”法制备了介孔碳化钨/炭纳米复合材料,主要包括“油包水”微乳液形成、模板诱导自组装、高温碳化还原过程.采用X-射线衍射、透射电镜和比表面积和孔径分布等方法对材料进行了表征与分析.结果表明,该复合材料具有蠕虫状的介孔结构、高的比表面积、碳化钨粒子(约40 nm)均匀的分布在炭载体上,介孔碳化钨/炭纳米复合材料可用于燃料电池、化学传感器和电催化有机合成反应.
碳化鎢作為一種潛在的催化劑可廣汎應用于電化學催化和有機閤成反應,本文通過一種簡單可行的“軟模闆”法製備瞭介孔碳化鎢/炭納米複閤材料,主要包括“油包水”微乳液形成、模闆誘導自組裝、高溫碳化還原過程.採用X-射線衍射、透射電鏡和比錶麵積和孔徑分佈等方法對材料進行瞭錶徵與分析.結果錶明,該複閤材料具有蠕蟲狀的介孔結構、高的比錶麵積、碳化鎢粒子(約40 nm)均勻的分佈在炭載體上,介孔碳化鎢/炭納米複閤材料可用于燃料電池、化學傳感器和電催化有機閤成反應.
탄화오작위일충잠재적최화제가엄범응용우전화학최화화유궤합성반응,본문통과일충간단가행적“연모판”법제비료개공탄화오/탄납미복합재료,주요포괄“유포수”미유액형성、모판유도자조장、고온탄화환원과정.채용X-사선연사、투사전경화비표면적화공경분포등방법대재료진행료표정여분석.결과표명,해복합재료구유연충상적개공결구、고적비표면적、탄화오입자(약40 nm)균균적분포재탄재체상,개공탄화오/탄납미복합재료가용우연료전지、화학전감기화전최화유궤합성반응.
Tungsten carbide (WC) can be used as potential catalysts for various electrocatalyst and chemical reactions.A simply soft-template route to fabricate mesoporous tungsten carbide/carbon (WC/C) composites was prepared by W/O emulsion and triblock copolymer self-assembly strategies,followed by a high-temperature carbothermal reduction.XRD,TEM and BET surface area and pore size distribution techniques were employed to characterize the mesoporous WC/C nanocomposites.The results show that the resultant materials have wormlike mesostructure,nnaoscale (about 40 nm) and welldispersed tungsten carbide particles,and high surface areas.Furthermore,the mesoporous WC/C nanocomposites could have great potential applications in fuel cell electrocatalyst,sensors and organic synthesis reactions.