固体火箭技术
固體火箭技術
고체화전기술
JOURNAL OF SOLID ROCKET TECHNOLOGY
2008年
3期
258-261
,共4页
何景轩%丁文辉%侯晓%李侃
何景軒%丁文輝%侯曉%李侃
하경헌%정문휘%후효%리간
复合材料壳体%抗弹性能%侵彻%数值模拟
複閤材料殼體%抗彈性能%侵徹%數值模擬
복합재료각체%항탄성능%침철%수치모의
采用LS-DYNA动力有限元软件显式算法,对芳纶纤维/环氧树脂复合材料壳体弹道侵彻进行了有限元数值模拟分析,获得了不同入射角及不同初始速度条件下枪弹在复合材料中的速度变化规律.计算结果表明,在入射角为90°、60°、30°3种状态下,在钨珠弹和穿甲弹垂直于壳体入射时,复合材料吸收能量最低,剩余速度最大;随入射角度的减小,子弹与靶体作用时间增加,动能损失较多,导致其剩余速度变小,减小到一定程度出现跳弹.计算获得了钨珠弹及穿甲弹垂直入射穿透该壳体时的临界速度,该计算结果与实验结果吻合较好.
採用LS-DYNA動力有限元軟件顯式算法,對芳綸纖維/環氧樹脂複閤材料殼體彈道侵徹進行瞭有限元數值模擬分析,穫得瞭不同入射角及不同初始速度條件下鎗彈在複閤材料中的速度變化規律.計算結果錶明,在入射角為90°、60°、30°3種狀態下,在鎢珠彈和穿甲彈垂直于殼體入射時,複閤材料吸收能量最低,剩餘速度最大;隨入射角度的減小,子彈與靶體作用時間增加,動能損失較多,導緻其剩餘速度變小,減小到一定程度齣現跳彈.計算穫得瞭鎢珠彈及穿甲彈垂直入射穿透該殼體時的臨界速度,該計算結果與實驗結果吻閤較好.
채용LS-DYNA동력유한원연건현식산법,대방륜섬유/배양수지복합재료각체탄도침철진행료유한원수치모의분석,획득료불동입사각급불동초시속도조건하창탄재복합재료중적속도변화규률.계산결과표명,재입사각위90°、60°、30°3충상태하,재오주탄화천갑탄수직우각체입사시,복합재료흡수능량최저,잉여속도최대;수입사각도적감소,자탄여파체작용시간증가,동능손실교다,도치기잉여속도변소,감소도일정정도출현도탄.계산획득료오주탄급천갑탄수직입사천투해각체시적림계속도,해계산결과여실험결과문합교호.