功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2011年
2期
347-350
,共4页
孙宝玉%巴德纯%房也%杨彬%段永利
孫寶玉%巴德純%房也%楊彬%段永利
손보옥%파덕순%방야%양빈%단영리
NdFeB%薄型磁体%磁性能%真空退火%微组织结构%应变和亚晶粒
NdFeB%薄型磁體%磁性能%真空退火%微組織結構%應變和亞晶粒
NdFeB%박형자체%자성능%진공퇴화%미조직결구%응변화아정립
机加工成一定尺寸和形状的烧结NdFeB薄型磁体,由于表面晶粒形变和缺陷的产生引起了磁性能的降低,适当的真空退火热处理后,其磁性能将会得到恢复和提高.通过SEM扫描电镜,X射线衍射和磁性能的测量,研究了退火热处理对磁体表面层晶粒微结构、应变、亚晶粒尺寸和磁性能的影响.结果表明,在三相共晶点温度以上,900℃×2h+490℃×5h的退火可以完全消除机加工产生的应变、应力和缺陷.其次,表面层内晶界富Nd相的毛细管作用和扩散迁移,使富Nd相均匀、连续地分布在晶粒和晶界周围.这种富Nd相网状结构,消除了机加工磁体表层内的晶界裂纹和缺陷,对磁体性能的恢复和提高起着重要的作用.
機加工成一定呎吋和形狀的燒結NdFeB薄型磁體,由于錶麵晶粒形變和缺陷的產生引起瞭磁性能的降低,適噹的真空退火熱處理後,其磁性能將會得到恢複和提高.通過SEM掃描電鏡,X射線衍射和磁性能的測量,研究瞭退火熱處理對磁體錶麵層晶粒微結構、應變、亞晶粒呎吋和磁性能的影響.結果錶明,在三相共晶點溫度以上,900℃×2h+490℃×5h的退火可以完全消除機加工產生的應變、應力和缺陷.其次,錶麵層內晶界富Nd相的毛細管作用和擴散遷移,使富Nd相均勻、連續地分佈在晶粒和晶界週圍.這種富Nd相網狀結構,消除瞭機加工磁體錶層內的晶界裂紋和缺陷,對磁體性能的恢複和提高起著重要的作用.
궤가공성일정척촌화형상적소결NdFeB박형자체,유우표면정립형변화결함적산생인기료자성능적강저,괄당적진공퇴화열처리후,기자성능장회득도회복화제고.통과SEM소묘전경,X사선연사화자성능적측량,연구료퇴화열처리대자체표면층정립미결구、응변、아정립척촌화자성능적영향.결과표명,재삼상공정점온도이상,900℃×2h+490℃×5h적퇴화가이완전소제궤가공산생적응변、응력화결함.기차,표면층내정계부Nd상적모세관작용화확산천이,사부Nd상균균、련속지분포재정립화정계주위.저충부Nd상망상결구,소제료궤가공자체표층내적정계렬문화결함,대자체성능적회복화제고기착중요적작용.