金属制品
金屬製品
금속제품
STEEL WIRE PRODUCTS
2012年
1期
39-42
,共4页
邓保全%张全刚%范银平%王田丰
鄧保全%張全剛%範銀平%王田豐
산보전%장전강%범은평%왕전봉
SWRH82B%高碳钢%钢绞线%抗拉强度%断面收缩率
SWRH82B%高碳鋼%鋼絞線%抗拉彊度%斷麵收縮率
SWRH82B%고탄강%강교선%항랍강도%단면수축솔
SWRH82B高碳钢盘条主要用于制作高强度低松弛预应力钢丝和钢绞线.采用长短复合流程,优化化学成分,LF炉精炼时间不小于45 min,白渣保持时间不小于15 min;连铸结晶器电磁搅拌频率5 Hz,电流246 A,拉速2.1 ~2.3m/min,过热度小于30℃,比水量0.7~0.85 L/kg;轧制温度1050~1100℃,开轧温度950~990℃,减定径轧制及吐丝温度880~ 900℃,辊道速度40 ~60 m/min.生产的预应力钢绞线用SWRH82B高碳钢盘条,抗拉强度大于1 150 MPa,断面收缩率大于35%,夹杂物的尺寸小于20μm,数量小于6个/mm2,w(N)≤70×10-6,w(O)≤40×10-6,完全满足1 860 MPa级以上钢绞线用盘条的需要.
SWRH82B高碳鋼盤條主要用于製作高彊度低鬆弛預應力鋼絲和鋼絞線.採用長短複閤流程,優化化學成分,LF爐精煉時間不小于45 min,白渣保持時間不小于15 min;連鑄結晶器電磁攪拌頻率5 Hz,電流246 A,拉速2.1 ~2.3m/min,過熱度小于30℃,比水量0.7~0.85 L/kg;軋製溫度1050~1100℃,開軋溫度950~990℃,減定徑軋製及吐絲溫度880~ 900℃,輥道速度40 ~60 m/min.生產的預應力鋼絞線用SWRH82B高碳鋼盤條,抗拉彊度大于1 150 MPa,斷麵收縮率大于35%,夾雜物的呎吋小于20μm,數量小于6箇/mm2,w(N)≤70×10-6,w(O)≤40×10-6,完全滿足1 860 MPa級以上鋼絞線用盤條的需要.
SWRH82B고탄강반조주요용우제작고강도저송이예응력강사화강교선.채용장단복합류정,우화화학성분,LF로정련시간불소우45 min,백사보지시간불소우15 min;련주결정기전자교반빈솔5 Hz,전류246 A,랍속2.1 ~2.3m/min,과열도소우30℃,비수량0.7~0.85 L/kg;알제온도1050~1100℃,개알온도950~990℃,감정경알제급토사온도880~ 900℃,곤도속도40 ~60 m/min.생산적예응력강교선용SWRH82B고탄강반조,항랍강도대우1 150 MPa,단면수축솔대우35%,협잡물적척촌소우20μm,수량소우6개/mm2,w(N)≤70×10-6,w(O)≤40×10-6,완전만족1 860 MPa급이상강교선용반조적수요.