现代化工
現代化工
현대화공
MODERN CHEMICAL INDUSTRY
2008年
9期
74-76,78
,共4页
戴春皓%宁平%田森林%杨玲菲%郑希
戴春皓%寧平%田森林%楊玲菲%鄭希
대춘호%저평%전삼림%양령비%정희
B116型变换催化剂%黄磷尾气%部分变换%甲醇%合成气
B116型變換催化劑%黃燐尾氣%部分變換%甲醇%閤成氣
B116형변환최화제%황린미기%부분변환%갑순%합성기
采用B116型变换催化剂,对黄磷尾气部分变换制甲醇合成气进行中试实验,结果表明,三段催化剂装填方式优于两段装填,三段装填24 h内催化剂床层温度稳定,20 h时变换炉出口气体达到制甲醇合成气的要求;140 h内催化剂床层上部温度不能维持催化剂活性温度,且变换率逐渐降低,100 h时H2/CO体积比不能满足制甲醇合成气的要求.因此,将B116型催化剂用于黄磷尾气部分变换制甲醇合成气,存在不能长时间保持稳定的变换率,不能维持床层温度稳定的问题.因此为黄磷尾气综合利用实现工业化,需开发新型耐高浓度CO的变换催化剂.
採用B116型變換催化劑,對黃燐尾氣部分變換製甲醇閤成氣進行中試實驗,結果錶明,三段催化劑裝填方式優于兩段裝填,三段裝填24 h內催化劑床層溫度穩定,20 h時變換爐齣口氣體達到製甲醇閤成氣的要求;140 h內催化劑床層上部溫度不能維持催化劑活性溫度,且變換率逐漸降低,100 h時H2/CO體積比不能滿足製甲醇閤成氣的要求.因此,將B116型催化劑用于黃燐尾氣部分變換製甲醇閤成氣,存在不能長時間保持穩定的變換率,不能維持床層溫度穩定的問題.因此為黃燐尾氣綜閤利用實現工業化,需開髮新型耐高濃度CO的變換催化劑.
채용B116형변환최화제,대황린미기부분변환제갑순합성기진행중시실험,결과표명,삼단최화제장전방식우우량단장전,삼단장전24 h내최화제상층온도은정,20 h시변환로출구기체체도제갑순합성기적요구;140 h내최화제상층상부온도불능유지최화제활성온도,차변환솔축점강저,100 h시H2/CO체적비불능만족제갑순합성기적요구.인차,장B116형최화제용우황린미기부분변환제갑순합성기,존재불능장시간보지은정적변환솔,불능유지상층온도은정적문제.인차위황린미기종합이용실현공업화,수개발신형내고농도CO적변환최화제.