塑料工业
塑料工業
소료공업
CHINA PLASTICS INDUSTRY
2009年
7期
38-41
,共4页
李朋朋%梁天珍%王卓妮%刘敏%王美玲
李朋朋%樑天珍%王卓妮%劉敏%王美玲
리붕붕%량천진%왕탁니%류민%왕미령
茂金属%聚乙烯%共混物%熔体强度%流变行为
茂金屬%聚乙烯%共混物%鎔體彊度%流變行為
무금속%취을희%공혼물%용체강도%류변행위
用茂金属线型低密度聚乙烯(mLLDPE)与通用聚乙烯(LDPE、LLDPE)进行共混,测定了共混物的熔体质量流动速率(MFR);研究了共混物熔体的熔体强度和剪切敏感性.结果发现:当质量分数超过20%的mLLDPE与高熔体质量流动速率(MFR)的通用聚乙烯共混时,或者质量分数小于40%的mLLDPE与低MFR的通用聚乙烯共混时,共混物熔体的流动性会小于单一共混组分,除了在与一种LDPE共混时mLLDPE加入质量分数为10%的一种共混物外,其他共混物的熔体强度都超过单个共混组分.mLLDPE/LLDPE共混物熔体的剪切敏感性高于LLDPE.
用茂金屬線型低密度聚乙烯(mLLDPE)與通用聚乙烯(LDPE、LLDPE)進行共混,測定瞭共混物的鎔體質量流動速率(MFR);研究瞭共混物鎔體的鎔體彊度和剪切敏感性.結果髮現:噹質量分數超過20%的mLLDPE與高鎔體質量流動速率(MFR)的通用聚乙烯共混時,或者質量分數小于40%的mLLDPE與低MFR的通用聚乙烯共混時,共混物鎔體的流動性會小于單一共混組分,除瞭在與一種LDPE共混時mLLDPE加入質量分數為10%的一種共混物外,其他共混物的鎔體彊度都超過單箇共混組分.mLLDPE/LLDPE共混物鎔體的剪切敏感性高于LLDPE.
용무금속선형저밀도취을희(mLLDPE)여통용취을희(LDPE、LLDPE)진행공혼,측정료공혼물적용체질량류동속솔(MFR);연구료공혼물용체적용체강도화전절민감성.결과발현:당질량분수초과20%적mLLDPE여고용체질량류동속솔(MFR)적통용취을희공혼시,혹자질량분수소우40%적mLLDPE여저MFR적통용취을희공혼시,공혼물용체적류동성회소우단일공혼조분,제료재여일충LDPE공혼시mLLDPE가입질량분수위10%적일충공혼물외,기타공혼물적용체강도도초과단개공혼조분.mLLDPE/LLDPE공혼물용체적전절민감성고우LLDPE.