中国组织工程研究
中國組織工程研究
중국조직공정연구
Journal of Clinical Rehabilitative Tissue Engineering Research
2012年
3期
396-400
,共5页
聚乳酸-羟基乙酸%纳米粒%粒径%工艺%生物材料
聚乳痠-羥基乙痠%納米粒%粒徑%工藝%生物材料
취유산-간기을산%납미립%립경%공예%생물재료
背景:聚乳酸-羟基乙酸是一种生物相容性良好的可降解材料,确定其最佳制备工艺条件,有利于聚乳酸-羟基乙酸后续药物载体研究与工业化生产条件的确立.目的:以聚乳酸-羟基乙酸为包裹材料,探索纳米粒的制备条件对粒径、表面形态等的影响,确定最佳制备工艺条件.方法:采用乳化-溶剂挥发法制备聚乳酸-羟基乙酸纳米粒,以粒径为观察指标,探讨乳化剂种类、乳化剂含量、油相种类、超声时间、挥发时间、油相与水相体积比(W∶O)以及聚合物质量浓度等制备条件对纳米粒粒径的影响,确定制备聚乳酸-羟基乙酸纳米粒的最佳工艺条件.结果与结论:优化后的制备工艺条件是在室温下,以一定的搅拌速度和滴加速度,选择常用无毒的乳化剂,浓度在0.3%~1.0%,丙酮为有机相,超声时间8~15 min、挥发时间6~10 h、水油相比(W∶O)>25∶1,聚合物质量浓度<60 g/L.提示该制备工艺简单、稳定,优化制备条件,可制备出表面形态规整、粒径适宜的聚乳酸-羟基乙酸纳米粒.
揹景:聚乳痠-羥基乙痠是一種生物相容性良好的可降解材料,確定其最佳製備工藝條件,有利于聚乳痠-羥基乙痠後續藥物載體研究與工業化生產條件的確立.目的:以聚乳痠-羥基乙痠為包裹材料,探索納米粒的製備條件對粒徑、錶麵形態等的影響,確定最佳製備工藝條件.方法:採用乳化-溶劑揮髮法製備聚乳痠-羥基乙痠納米粒,以粒徑為觀察指標,探討乳化劑種類、乳化劑含量、油相種類、超聲時間、揮髮時間、油相與水相體積比(W∶O)以及聚閤物質量濃度等製備條件對納米粒粒徑的影響,確定製備聚乳痠-羥基乙痠納米粒的最佳工藝條件.結果與結論:優化後的製備工藝條件是在室溫下,以一定的攪拌速度和滴加速度,選擇常用無毒的乳化劑,濃度在0.3%~1.0%,丙酮為有機相,超聲時間8~15 min、揮髮時間6~10 h、水油相比(W∶O)>25∶1,聚閤物質量濃度<60 g/L.提示該製備工藝簡單、穩定,優化製備條件,可製備齣錶麵形態規整、粒徑適宜的聚乳痠-羥基乙痠納米粒.
배경:취유산-간기을산시일충생물상용성량호적가강해재료,학정기최가제비공예조건,유리우취유산-간기을산후속약물재체연구여공업화생산조건적학립.목적:이취유산-간기을산위포과재료,탐색납미립적제비조건대립경、표면형태등적영향,학정최가제비공예조건.방법:채용유화-용제휘발법제비취유산-간기을산납미립,이립경위관찰지표,탐토유화제충류、유화제함량、유상충류、초성시간、휘발시간、유상여수상체적비(W∶O)이급취합물질량농도등제비조건대납미립립경적영향,학정제비취유산-간기을산납미립적최가공예조건.결과여결론:우화후적제비공예조건시재실온하,이일정적교반속도화적가속도,선택상용무독적유화제,농도재0.3%~1.0%,병동위유궤상,초성시간8~15 min、휘발시간6~10 h、수유상비(W∶O)>25∶1,취합물질량농도<60 g/L.제시해제비공예간단、은정,우화제비조건,가제비출표면형태규정、립경괄의적취유산-간기을산납미립.