工业水处理
工業水處理
공업수처리
INDUSTRIAL WATER TREATMENT
2012年
9期
52-55
,共4页
铬%电镀废水%铬黄%铁氧体%二次污染
鉻%電鍍廢水%鉻黃%鐵氧體%二次汙染
락%전도폐수%락황%철양체%이차오염
采用回收铬黄和铁氧体法对青岛某公司的高浓度含铬电镀废水进行资源化处理,并考察各因素的影响.实验结果表明,当废水初始pH=9.0,反应温度为70℃,氧化时间60 min时,废水中三价铬的氧化率达95.23%.将氧化后的废水过滤,得到铬黄母液.调节母液pH=9.0,反应温度60℃,加入硝酸铅52.6 g/L,母液中铬回收率可达100%,可获得合格的铬黄产品.采用铁氧体法进行后续处理,出水中的铬、铅均达到GB 21900-2008要求.
採用迴收鉻黃和鐵氧體法對青島某公司的高濃度含鉻電鍍廢水進行資源化處理,併攷察各因素的影響.實驗結果錶明,噹廢水初始pH=9.0,反應溫度為70℃,氧化時間60 min時,廢水中三價鉻的氧化率達95.23%.將氧化後的廢水過濾,得到鉻黃母液.調節母液pH=9.0,反應溫度60℃,加入硝痠鉛52.6 g/L,母液中鉻迴收率可達100%,可穫得閤格的鉻黃產品.採用鐵氧體法進行後續處理,齣水中的鉻、鉛均達到GB 21900-2008要求.
채용회수락황화철양체법대청도모공사적고농도함락전도폐수진행자원화처리,병고찰각인소적영향.실험결과표명,당폐수초시pH=9.0,반응온도위70℃,양화시간60 min시,폐수중삼개락적양화솔체95.23%.장양화후적폐수과려,득도락황모액.조절모액pH=9.0,반응온도60℃,가입초산연52.6 g/L,모액중락회수솔가체100%,가획득합격적락황산품.채용철양체법진행후속처리,출수중적락、연균체도GB 21900-2008요구.