弹性体
彈性體
탄성체
CHINA ELASTOMERICS
2001年
2期
26-28
,共3页
短玻纤%ABS%复合材料%偶联剂
短玻纖%ABS%複閤材料%偶聯劑
단파섬%ABS%복합재료%우련제
介绍短玻纤增强ABS复合材料的生 产工艺，实验对比了处理玻纤用偶联剂种类和加 入量、玻纤含量、ABS种类及抗冲改性剂加入量对复合材料性能的影响。结果表明，玻纤用 质量分数为1.5%的偶联剂KH550处理，可增强9715A-ABS，同时加入质量分数为2%抗冲改性 剂的可得到综合性能较好的复合材料。
介紹短玻纖增彊ABS複閤材料的生 產工藝，實驗對比瞭處理玻纖用偶聯劑種類和加 入量、玻纖含量、ABS種類及抗遲改性劑加入量對複閤材料性能的影響。結果錶明，玻纖用 質量分數為1.5%的偶聯劑KH550處理，可增彊9715A-ABS，同時加入質量分數為2%抗遲改性 劑的可得到綜閤性能較好的複閤材料。
개소단파섬증강ABS복합재료적생 산공예，실험대비료처리파섬용우련제충류화가 입량、파섬함량、ABS충류급항충개성제가입량대복합재료성능적영향。결과표명，파섬용 질량분수위1.5%적우련제KH550처리，가증강9715A-ABS，동시가입질량분수위2%항충개성 제적가득도종합성능교호적복합재료。
This article described the process of short glass fiber reinforced ABS composite.The category and feeding volumes of coupling agent for treating glass fiber,glass fiber content,ABS category are compared,the effect of anti-impact modifier on properties of the composite was involved in this experiment.The result showed that 9715A ABS was reinforced after treating glass fiber by 1.5% coupling agent KH550,the overall properties of the composites also can be achieved with present of 2% anti-impact modifier.
