中华骨科杂志
中華骨科雜誌
중화골과잡지
CHINESE JOURNAL OF ORTHOPAEDICS
2012年
9期
872-875
,共4页
赵宝辉%陈百成%王聪%邓默%任宝%徐佳丽%高文山
趙寶輝%陳百成%王聰%鄧默%任寶%徐佳麗%高文山
조보휘%진백성%왕총%산묵%임보%서가려%고문산
关节成形术,置换,膝%体层摄影术,X线计算机%图像处理,计算机辅助
關節成形術,置換,膝%體層攝影術,X線計算機%圖像處理,計算機輔助
관절성형술,치환,슬%체층섭영술,X선계산궤%도상처리,계산궤보조
Arthroplasty,replacement,knee%Tomography,X-ray computed%Image processing,computer-assisted
目的 探讨胫骨假体旋转对线标志在全膝关节置换术中的定位作用.方法 15名健康成年志愿者,男10名,女5名;年龄21~38岁,平均(28.1±6.O)岁.行膝关节完全伸直位CT横断面扫描,26幅CT扫描图像纳入研究.在CT扫描图像上描绘两条胫骨前后轴线:后十字韧带止点中点分别与髌韧带止点处内侧缘及髌韧带中内1/3点连线,股骨外科髁上轴线;测量两条胫骨前后轴线分别与股骨外科髁上轴垂线的夹角,并与理想的胫骨假体旋转对线标志即0°进行比较.结果 股骨外科髁上轴垂线与后十字韧带止点中点与髌韧带止点处内侧缘连线的夹角为-5.1 °~5.8°,平均0.7.±2.8.,与0°比较差异无统计学意义;与后十字韧带止点中点与髌韧带中内1/3点连线的夹角为-3.4°~14.1°,平均6.9°±5.3°,与0°比较差异有统计学意义.两条胫骨前后轴线与股骨外科髁上轴垂线的夹角比较差异有统计学意义.结论 胫骨假体旋转对线可参考后十字韧带止点中点与髌韧带止点处内侧缘连线,使股骨与胫骨假体间旋转对线更匹配.
目的 探討脛骨假體鏇轉對線標誌在全膝關節置換術中的定位作用.方法 15名健康成年誌願者,男10名,女5名;年齡21~38歲,平均(28.1±6.O)歲.行膝關節完全伸直位CT橫斷麵掃描,26幅CT掃描圖像納入研究.在CT掃描圖像上描繪兩條脛骨前後軸線:後十字韌帶止點中點分彆與髕韌帶止點處內側緣及髕韌帶中內1/3點連線,股骨外科髁上軸線;測量兩條脛骨前後軸線分彆與股骨外科髁上軸垂線的夾角,併與理想的脛骨假體鏇轉對線標誌即0°進行比較.結果 股骨外科髁上軸垂線與後十字韌帶止點中點與髕韌帶止點處內側緣連線的夾角為-5.1 °~5.8°,平均0.7.±2.8.,與0°比較差異無統計學意義;與後十字韌帶止點中點與髕韌帶中內1/3點連線的夾角為-3.4°~14.1°,平均6.9°±5.3°,與0°比較差異有統計學意義.兩條脛骨前後軸線與股骨外科髁上軸垂線的夾角比較差異有統計學意義.結論 脛骨假體鏇轉對線可參攷後十字韌帶止點中點與髕韌帶止點處內側緣連線,使股骨與脛骨假體間鏇轉對線更匹配.
목적 탐토경골가체선전대선표지재전슬관절치환술중적정위작용.방법 15명건강성년지원자,남10명,녀5명;년령21~38세,평균(28.1±6.O)세.행슬관절완전신직위CT횡단면소묘,26폭CT소묘도상납입연구.재CT소묘도상상묘회량조경골전후축선:후십자인대지점중점분별여빈인대지점처내측연급빈인대중내1/3점련선,고골외과과상축선;측량량조경골전후축선분별여고골외과과상축수선적협각,병여이상적경골가체선전대선표지즉0°진행비교.결과 고골외과과상축수선여후십자인대지점중점여빈인대지점처내측연련선적협각위-5.1 °~5.8°,평균0.7.±2.8.,여0°비교차이무통계학의의;여후십자인대지점중점여빈인대중내1/3점련선적협각위-3.4°~14.1°,평균6.9°±5.3°,여0°비교차이유통계학의의.량조경골전후축선여고골외과과상축수선적협각비교차이유통계학의의.결론 경골가체선전대선가삼고후십자인대지점중점여빈인대지점처내측연련선,사고골여경골가체간선전대선경필배.
Objective To investigate the role of rotational alignment reference landmarks of the proximal tibia in total knee arthroplasty.Methods Fifteen healthy adult volunteers were enrolled in this study,including 10 males and 5 females,aged from 21 to 38 years (average,28.1±6.0).CT scans of 26 knees were taken as the knees were placed in full extension.Two anteroposterior axes were drawn on the CT images:one line connected the middle of the posterior cruciate ligament insertion site and the medial edge of the patellar tendon,and another line connected the middle of the posterior cruciate ligament insertion site and the middle-medial 1/3 of the patellar tendon.The surgical epicondylar axis was also drawn on the CT images.Angles were measured between a line perpendicular to the surgical epicondylar axis and the two anteroposterior axes,and the angles were compared with the ideal tibial rotational alignment reference axis (0°).Results Angles between the line perpendicular to the surgical epicondylar axis and the line connecting the middle of the posterior cruciate ligament insertion site and the medial edge of the patellar tendon averaged 0.7°±2.8° (range,-5.1°-5.8°),there was no significant difference compared with 0°.Angles between the line perpendicular to the surgical epicondylar axis and the line connecting the middle of the posterior cruciate ligament insertion site and the middle-medial 1/3 of the patellar tendon averaged 6.9°±5.3° (range,-3.4°-14.1°),there was significant difference compared with 0°.Significant difference existed in angles between the two anteroposterior axes and the line perpendicular to the surgical epicondylar axis.Conclusion The line connecting the middle of the posterior cruciate ligament insertion site and the medial edge of the patellar tendon is a more reliable reference axis for the tibial component rotational alignment,which makes the femoral and tibial components in a more matching rotational position.