材料导报
材料導報
재료도보
MATERIALS REVIEW
2012年
8期
129-132
,共4页
闻俊峰%蒋亚东%杨亚杰%徐建华
聞俊峰%蔣亞東%楊亞傑%徐建華
문준봉%장아동%양아걸%서건화
导电聚合物%钽电解电容器%高比容钽粉
導電聚閤物%鐽電解電容器%高比容鐽粉
도전취합물%단전해전용기%고비용단분
针对比容为50000~70000μF ·V/g的较高比容钽粉,研究了导电聚合物聚3,4-乙烯基二氧噻吩(PEDOT)作为阴极材料的有机片式固体钽电解电容器的制备工艺,通过调整阳极体制备及阴极被覆工艺等参数实现了PEDOT在高比容钽块表面的有效被覆,获得了各项性能参数良好的聚合物片式钽电解电容器.重点研究了压制密度、形成电流密度等参数及分段被膜工艺对聚合物片式固体钽电容器容量引出、等效串联电阻、漏电流等性能的影响,并讨论了相应的电容器工作机理.
針對比容為50000~70000μF ·V/g的較高比容鐽粉,研究瞭導電聚閤物聚3,4-乙烯基二氧噻吩(PEDOT)作為陰極材料的有機片式固體鐽電解電容器的製備工藝,通過調整暘極體製備及陰極被覆工藝等參數實現瞭PEDOT在高比容鐽塊錶麵的有效被覆,穫得瞭各項性能參數良好的聚閤物片式鐽電解電容器.重點研究瞭壓製密度、形成電流密度等參數及分段被膜工藝對聚閤物片式固體鐽電容器容量引齣、等效串聯電阻、漏電流等性能的影響,併討論瞭相應的電容器工作機理.
침대비용위50000~70000μF ·V/g적교고비용단분,연구료도전취합물취3,4-을희기이양새분(PEDOT)작위음겁재료적유궤편식고체단전해전용기적제비공예,통과조정양겁체제비급음겁피복공예등삼수실현료PEDOT재고비용단괴표면적유효피복,획득료각항성능삼수량호적취합물편식단전해전용기.중점연구료압제밀도、형성전류밀도등삼수급분단피막공예대취합물편식고체단전용기용량인출、등효천련전조、루전류등성능적영향,병토론료상응적전용기공작궤리.